Jump to content
SAU Community

Recommended Posts

Guys and Girls

I have been offered a new job and managed to negotiate a car allowance into it as I sold mine to fund a house deposit. The company does have a novated lease scheme that I can participate in if I want to or I can get a personal loan. From memory and the novated car lease thread from November, none of these cars will be applicable as they will all be over 8 years old at the end of the term.

SAU, I have found to be very neutral on car choice, hence the reason for asking here unlike other forums where users have blinkered vision.

My budget is really 30-35K and all of the above models bar the GTR would be 99-00 vehicles with the GTR being around a 96. I also know this budget is not top $ for each of the vehicles.

The reason for asking this now is I will need to start the new job about 2 weeks after I get back so have to get a move on with a car and would ideally like to know before I return.

This car has to be a daily driver for largely freeway driving between Geelong and Melbourne.

So opinions would be welcome on any or all as I need to get the ball rolling.

Thanks in advance people :worship:

*EDIT - OK so I stuffed the poll up! Car choices are GTR 33, GTT 34, EVO 6, STI

Link to comment
https://www.sau.com.au/forums/topic/116776-car-choice-help-needed-please/
Share on other sites

We have a 96 VSpec GTR, and a 98 Series 3 GTR if you're interested (both in the 35K mark) :worship:

Pics can be seen here:

http://allblitz.com.au/cars/017_nskyline33gtrpurple.htm

http://allblitz.com.au/cars/014_nskyline33gtrwhite.htm

Have you made sure that your lease will let you do the imports? it should but may be more hassle than the local stuff.... worth finding out first...

All the cars you have listed I like and are good... depends what you want to do with them? Track days? Go the 33R ... rally type events, go the evo.... road driving hmmm they are all ok, dunno about the long drives between geelong and melbourne... might be better to go the evo or the STI... tough choice :D

Alan mate i would have to say go the GTR as we all know when you were driving one around you were loving it...

Also if it's a company car premium petrol won’t be an issues as it will all be paid for if that’s right??

Guess your best bet is to take a Evo and an STI for a drive and see which you like best and base your decision on that.

Thanks everyone for the replies :sick:

Husnu - Midnight purple one looks very nice.

Snowy - The 6 is my favourite for lines but as you say the TME is still commanding big $$.

Ferni - The only car I think will fall under a novated is the STI (if I got a slightly newer one) as the others are imports and will also be older than 8 years at the end of the lease. Yours is on a novated lease though isnt it from memory and would be older than 8 years at the end?

Mav - Not sure on petrol but I have budgeted for it in my annual costings so if I have to pay for it, I will be OK

BOOSTED, Dezz, ctjet - thanks guys :(

Track stuff is more what I would like to do although an all rounder would be good to enable a try at the other types.

Two things put me off the rex and that is the amount of them on the road and the high insurance they command, probably because of the amount of younger guys driving them. :(

Two things put me off the rex and that is the amount of them on the road and the high insurance they command, probably because of the amount of younger guys driving them.

how bad could insurace possibly be for a rex compared to the rest of you options?? i would imagine they're all up there with the best of em...

How many STI and how many evos do you see everyday? heaps!

how many GTRs? f***all!

if you can sqeeze a GTR in the years your allowed into your budget then take it like its allready been said you wont be paying the fuel bills or insurance and you get that wow factor not the "oh another STI wow"

P.S

lucky prick!! :(

you will struggle to get a grey import on a novated lease.

most of them have canned in due to insurance and other associated costs and risks. no idea how ferni got his gtr on it, must have been lucky. my 33 was on lease but it was canned (grey imports) a long time ago.

so choice of a local delivered

have you looked into the Liberty B4?

hey alan..

i was and still am in a similiar situation since about a year ago, and i was considering a lotus elise(i know its not in the above list) for a daily drive and maybe some track days...aparently they handle rather well and have a good power to weight ratio...and in my opinion they look good, different and are relatively rare..

the only downside that i can think are the size which may cause practicality issues, the lack of electronics like power windows(which i dont overly mind having less buttons around) and a hard suspension(again i dont mind that much)...

but it is over your budget, 99-00 models range from 40-55k..

and of course it would take away some of the home-sickness that u may still experience from time to time :(

just thought i would add something different to the list..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello everyone. I've recently started the research into R34 GTR front bits and running into eye watering prices. On the plus site it looks like some places make 'replacement' fender liners for these cars. At eye-watering-but-less than stock prices. I also noticed there's plenty of diffuser options available too. What I would like to know is if my following assumptions are correct. 1) The OEM guard liners are actually only 'half' the liner. They go together with the OEM brake vents which are a separate item which looks to be quite a large 'panel' that is part of the liner. The GTR bumper has bolt holes along the front. I assume the ones in the vent correspond to the ones the OEM liner does not have (circled?)   2) The V-Spec front diffuser supplants the brake ducts in the above item. I am assuming these still work with the guard liners as there's no alternate part. I don't see how they go together, so I'm making the assumption that they do. I know the center splash guard is different on the V-Spec How does the liner interact with that? 3) There's alternate front diffusers that do away with it all. Annoyingly, a lot of the clones and CF different ones... have no brake ducts on them. I like the idea of them though. My brakes get hot on the track. These alternate diffusers are a lot cheaper than plastic splash guards. I'm assuming you don't have to/aren't supposed to remove guard liners to run a diffuser. I suspect that quite a few people actually do not run the guard liner because with a front undertray you're getting a lot of 'splash' guarding anyway, and most people remove liners given they're probably running a pretty aggressive setup with a diffuser at the front. It would also be nice to know if anyone has ever run the 'reproduction' guard liners and know whether the fitment is OEM quality or "OEM Quality". Example: https://www.ebay.com.au/itm/356254671561 https://carbonetics.net/products/nissan-skyline-r34-gtr-plastic-front-wheel-arch-set Is this knowledge still around?
    • Really, effort is pretty low. You hand fistfuls of cash over to someone else and pick it up when done...   And at least this shitbox isn't drinking coolant right?  
    • And most chargers that most DIY people own would put bugger all power back into the battery between cylinders. I've always done it with jumper packs/second battery connected. And that's on any car.   Because race car, and wanting the lightness.  At least in an R33, putting a bigger battery in can at least help shift the weight balance backwards  
    • OR, Tell the Motec to STFU, you said shift, so try shifting! But then yes, I agree, more sensors needed to. Put either a wheel speed sensor, or a diff speed sensor on it. Then get an input shaft speed sensor too. (I say input shaft speed, and not engine RPM). This way, you can now also log and see if the clutch is slipping (RPM, vs input shaft speed), and you can calculate gear (Input shaft speed / Output shaft speed). At least then if the gear position sensor fails you have a backup. And realistically, the Motec should only worry about what gear you're in for the parts where I'm assuming you have some power management strategies in it for the lower gears. (IE, lower boost, maybe different throttle curves, different ignition curves, etc etc). But it should stop it shifting. Pull the flappy, that f**ker should just attempt the motion! Heck, even on a sequential like on a motorbike, you can keep trying to kick it up a gear all you want, the physically part of the box takes care of not being able to loop the whole way around the box! Only part you'd have to worry is how it gets to reverse.  But that's on the driver... An R32 shouldn't be so smart as to try and override the driver on a gear shift  
    • Yeah, nah. Anyone not putting the absolutely largest battery that will physically fit (ie, NS70 X) is not thinking straight. the NS70 X is close on double the capacity of the "stock" unit.
×
×
  • Create New...