Jump to content
SAU Community

I Need Some Help...

Mavric

By Mavric,
in Victoria

 Share

Recommended Posts

Mavric Grand Master

Mavric

Posted
Posted

As some of you are aware im selling copies of the Banana bar but i have run into a slight problem... I have No idea what indicators are being used in the bar and obviously makes it hard to sell the bar and have no idea what indicators it comes with...

If anyone can shed some light as to what indicators they are it would be very much appreciated.. I have spoken to Nissan and a few other places and no-one can tell me what they are…

Back dimensions are around 90x40mm at the base and span out to a 125x40mm at the front..

Attached is a shot of the indicator…

post-11799-1147093955.jpg

Thanx again in advance to anyone that can tell me what they are off cheers…

Matt

Also if your interested in the bar Link is below in the Sig....

Link to comment
https://www.sau.com.au/forums/topic/116924-i-need-some-help/
Share on other sites
Mavric Grand Master

Mavric

Posted
  • Author
Posted

Dark cheers mate but there is nothing... All the indicators has is a Manufactures Number and Both Nissan and a second hand joint have both told me that the numbers mean Jack and im unable to order parts from the given markings..

Hence this being such a hard task

dan22 Enthusiast

dan22

Posted
Posted

have u tried running the numbers through mitsibushi or toyota, cuz by the looks of those n the dimensions, it looks as its off a pre 98 Mitsibushi Canter (its a 1 ton truck, sorta).....i may be wrong but run the part number through mitsubishi.....wudn hurt.....

khunjeng Veteran

khunjeng

Posted
Posted (edited)

ok they are not 180sx ones are they??

Right Hand: B6170-60F00

Left Hand: B6175-60F00

I have been looking at some 180sx kits and the hole looks very very similar in the sqaure shape...but i have no dimentions...

post-3725-1124260412.jpg

Edited by khunjeng

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • wizlb
      Flex Fuel Kit Workshop

      By wizlb · Posted

      Thanks Dose.....    I appreciate it!!
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • Piggaz
      Ogura orc1000f vs Osg tr2cd vs Osg r3c experiences, max torque/max hp?

      By Piggaz · Posted

      I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...