Jump to content
SAU Community

Recommended Posts

is it just in certain rev range or does it happen in differnt gears?

reason I'm asking is, my car pulls hard like a school boy with a stack of porno in first second and third gear, all the way up to/close to redline. The fourth gear and fifth seems a little lacking in torque. I pu the foot down and the car sound like its suffocating when reving higher. I'm wondering if thats a flat spot or if it is just because of the standard dump/front and cat restricting the air flow when the boost is increased.

Edited by lingeringsoul
oh well, no big deal anyway, once I order the split dump/front pipe and put on the high flow cat, I'll give it another test and then get it tuned properly. Thanks for all the info guys

yeah i'd put it down your exhaust restriction!

you should have just asked me what a flat spot was! I was talking about mine all the way to newcastle the other week! lol

reason I'm asking is, my car pulls hard like a school boy with a stack of porno in first second and third gear, all the way up to/close to redline. The fourth gear and fifth seems a little lacking in torque. I pu the foot down and the car sound like its suffocating when reving higher. I'm wondering if thats a flat spot or if it is just because of the standard dump/front and cat restricting the air flow when the boost is increased.

That's not a "flat spot" per se.

A flat spot would be if your school boy in 2nd gear stopped for a little while between say 3000-3200rpm before going hard again. That would be a flat spot.

What you're doing is underloading the engine. To see even the middle top of 5th in my car you're doing around 250kmh+ so if you whip out 5th and it isn't down the hill and you're doing 80 you're not going to have the response when you're in boost in 3rd.

yeah i'd put it down your exhaust restriction!

That's really not it. See above. If it WAS exhaust restriction it would be RPM dependant and it would be a gradual curve/taper in restriction. This is because the restriction would be directly relative to the volumetric output of the engine at that RPM/load. So you wouldn't experience this as a flat spot, unless for some reason your exhaust was changing in diameter as you accelerated.

By your description in your first post it seems normal - if you're worried get on a mountain/racing bike and see what happens when you pedal at a low gear, then at the same speed click it into the highest gear. When you pedal at this point you'll notice you're expending more effort to move the bike - that's the same thing.

Either way a good exhaust will free your engine anyway :woot:

That's not a "flat spot" per se.

A flat spot would be if your school boy in 2nd gear stopped for a little while between say 3000-3200rpm before going hard again. That would be a flat spot.

What you're doing is underloading the engine. To see even the middle top of 5th in my car you're doing around 250kmh+ so if you whip out 5th and it isn't down the hill and you're doing 80 you're not going to have the response when you're in boost in 3rd.

That's really not it. See above. If it WAS exhaust restriction it would be RPM dependant and it would be a gradual curve/taper in restriction. This is because the restriction would be directly relative to the volumetric output of the engine at that RPM/load. So you wouldn't experience this as a flat spot, unless for some reason your exhaust was changing in diameter as you accelerated.

By your description in your first post it seems normal - if you're worried get on a mountain/racing bike and see what happens when you pedal at a low gear, then at the same speed click it into the highest gear. When you pedal at this point you'll notice you're expending more effort to move the bike - that's the same thing.

Either way a good exhaust will free your engine anyway :P

oops, i thought he did say it was rev range specific! Nevertheless you explained some things I didn't know before!

btw.. I know who i'll be pming when i need help with my car!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...