Jump to content
SAU Community

Recommended Posts

is it just in certain rev range or does it happen in differnt gears?

reason I'm asking is, my car pulls hard like a school boy with a stack of porno in first second and third gear, all the way up to/close to redline. The fourth gear and fifth seems a little lacking in torque. I pu the foot down and the car sound like its suffocating when reving higher. I'm wondering if thats a flat spot or if it is just because of the standard dump/front and cat restricting the air flow when the boost is increased.

Edited by lingeringsoul
oh well, no big deal anyway, once I order the split dump/front pipe and put on the high flow cat, I'll give it another test and then get it tuned properly. Thanks for all the info guys

yeah i'd put it down your exhaust restriction!

you should have just asked me what a flat spot was! I was talking about mine all the way to newcastle the other week! lol

reason I'm asking is, my car pulls hard like a school boy with a stack of porno in first second and third gear, all the way up to/close to redline. The fourth gear and fifth seems a little lacking in torque. I pu the foot down and the car sound like its suffocating when reving higher. I'm wondering if thats a flat spot or if it is just because of the standard dump/front and cat restricting the air flow when the boost is increased.

That's not a "flat spot" per se.

A flat spot would be if your school boy in 2nd gear stopped for a little while between say 3000-3200rpm before going hard again. That would be a flat spot.

What you're doing is underloading the engine. To see even the middle top of 5th in my car you're doing around 250kmh+ so if you whip out 5th and it isn't down the hill and you're doing 80 you're not going to have the response when you're in boost in 3rd.

yeah i'd put it down your exhaust restriction!

That's really not it. See above. If it WAS exhaust restriction it would be RPM dependant and it would be a gradual curve/taper in restriction. This is because the restriction would be directly relative to the volumetric output of the engine at that RPM/load. So you wouldn't experience this as a flat spot, unless for some reason your exhaust was changing in diameter as you accelerated.

By your description in your first post it seems normal - if you're worried get on a mountain/racing bike and see what happens when you pedal at a low gear, then at the same speed click it into the highest gear. When you pedal at this point you'll notice you're expending more effort to move the bike - that's the same thing.

Either way a good exhaust will free your engine anyway :woot:

That's not a "flat spot" per se.

A flat spot would be if your school boy in 2nd gear stopped for a little while between say 3000-3200rpm before going hard again. That would be a flat spot.

What you're doing is underloading the engine. To see even the middle top of 5th in my car you're doing around 250kmh+ so if you whip out 5th and it isn't down the hill and you're doing 80 you're not going to have the response when you're in boost in 3rd.

That's really not it. See above. If it WAS exhaust restriction it would be RPM dependant and it would be a gradual curve/taper in restriction. This is because the restriction would be directly relative to the volumetric output of the engine at that RPM/load. So you wouldn't experience this as a flat spot, unless for some reason your exhaust was changing in diameter as you accelerated.

By your description in your first post it seems normal - if you're worried get on a mountain/racing bike and see what happens when you pedal at a low gear, then at the same speed click it into the highest gear. When you pedal at this point you'll notice you're expending more effort to move the bike - that's the same thing.

Either way a good exhaust will free your engine anyway :P

oops, i thought he did say it was rev range specific! Nevertheless you explained some things I didn't know before!

btw.. I know who i'll be pming when i need help with my car!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...