Jump to content
SAU Community

Ended! Gb: Gktech Front Mount Kits! $400! Ended!


Recommended Posts

Sorry dezz, I am going to have to take a reincheck, I need a new clutch more than an intercooler at the moment. If the GB is still going in a couple of weeks, I will have another look.

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

Sorry dezz, I am going to have to take a reincheck, I need a new clutch more than an intercooler at the moment. If the GB is still going in a couple of weeks, I will have another look.

No problem mate. i'll hear from you in a few weeks ;)

Put me down 4 1. r33 gts-t.

done :D

sorry for the late reply mate. Put me down for one R33 kit :D

done :)

you ever heard VL turbos making that noise wen they back off the throttle? thats their crazy VL blow off valves....with a front mount, you get a bit of cooler noise....but not exactly what those guys have (which is not cool! lol)

yeah i did, but 2 of them have said they're out...and yeah...

but fear not, ill be sending out a PM to all those on the list, as we're ready to start collecting the $ and the kits will be bought, and sent out :)

check your PM's tomorrow probably guys!

Ok guys

these 10 people have a PM regarding payment!

1. EGA41T - R34 GT-T

2. hayden49 - R33 GTS-T

3. Promax - R33 GTS-T

4. BiAsA - R33 GTS-T

5. Paradizzle - R33 GTS-T

6. mass_iv - R33 GTS-T

7. the_barman82 - R33 GTS-T

8. khunjeng - R33 GTS-T

9. Musky - R33 GTS-T

10. l0WRB - R33 GTS-T

Anyone still interested, its not too late to get in and grab a kit, even after the first lot has been paid for and sent out :angry:

1. EGA41T - R34 GT-T

2. hayden49 - R33 GTS-T - PAID

3. Promax - R33 GTS-T - PAID

4. BiAsA - R33 GTS-T - PAID

5. Paradizzle - R33 GTS-T - PAID

6. mass_iv - R33 GTS-T - PAID

7. the_barman82 - R33 GTS-T - PAID

8. khunjeng - R33 GTS-T - PAID

9. Musky - R33 GTS-T - PAID

10. l0wRB - R33 GTS-T - PAID

11. MadTrang - R32 GTS-T - PAID

if you have paid , and its not noted next to your name, it just means it hasn't shown up in the account yet, so be patient. I'll update your status as soon as I see the money in the account :cheers:

Those who haven't paid, please do so ASAP so everyone else can get their kits :ermm:

Can someone please tell me which picture on the front page is the kit for an R33 series 2?

The kit that is pictured is for the GTS-T's.

cheers,

Greg

im in!, i rang the place up today and he told me about it..

i just bought my r33 few days ago, so im down for this, be getting one from him regardless...

if i dont get in the group buy, only save 50 dollars anyhow..

Edited by B-rad33
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...