Jump to content
SAU Community

Recommended Posts

Hi All,

I have been reading this forum for ages and just got round to signing up...

I have a 92' R32 GTST and have had it for about a year. It was almost completly stock when I got it and it was my first performance car. It felt hella fast, but now I feel it's wearing off. So I have done some mods and would like some feedback on wether I am missing any bits...

Rb20DET

R34 Turbocharger

Apexi sidemount intercooler (looks completly stock)

Bosh fuel pump (400hp)

Malpassi Rising rate fuel pressure regulator

3" turbo back kakimoto exhaust with split dump

Turbotech boost controller

Exhaust cam gear

Stock BOV

Stock Injectors flow tested

Stock AFM

I was aiming for about 180 kw and thought that is more than enough for my car as its a daily driver and I don't need any more power than this.

I was having a couple of problems relating to the factory management. I was getting maximum air sensing from the AFM at 10psi. I was also getting minor pinging at 4700 to 5200 rpm under quick bursts of accelleration. and my fuel economy sucked.

I decided to draw the line on the modifications and I had always planned to get the ECU chipped rather than a power FC due to the cost. and I wanted to wait till all my other mods were done.

I have just got a remap done and I am very impressed. I sent my specs and get a new tune sent to me 4 days later. Pluged the new chip in the computer and the car started YAY!!!. I had the AFR's checked via a mates wideband 02 sensor with a data logger. and am pretty happy with the results. It is quite rich from 5500 to 7000 but I guess that is for safety.

I got the remap done by this guy because I had heard good things about him from a few mates

The car absoutly RIPS now. I am running .9 bar and it is like an animal to drive. it pulls like a freight train and there is heaps more midrange power.

The remap only cost me $160 for the tune, $20 to get the ECU socketed and a case of beer for the loan of the wideband 02 sensor. I really want to get it dynoed just to see how much power it is making but I don't really care about a number.

Anyway let me know what you think. Have I missed anything? would you add anything else? I am really busy at the moment but I will have the car dynoed over the next 2 weeks.

Edited by secondhandninja
Link to comment
https://www.sau.com.au/forums/topic/117983-remapping-an-r32-ecu-done-and-done/
Share on other sites

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

I felt sick today. Cough Cough I called is sick and took my car to the dyno doctor LOL

I only did a couple of power runs. I am very happy with the result. The turbotech does a really good job of holding the boost and the new rechip is smack on perfect.

untitled.gif

I was told it is an excellent power curve. Is it supposed to be done in 4th gear? there was no sign of pinging the air flow ratios were about 12:1 :D:O:P

I felt sick today. Cough Cough I called is sick and took my car to the dyno doctor LOL

I only did a couple of power runs. I am very happy with the result. The turbotech does a really good job of holding the boost and the new rechip is smack on perfect.

untitled.gif

I was told it is an excellent power curve. Is it supposed to be done in 4th gear? there was no sign of pinging the air flow ratios were about 12:1 :rofl::rofl::rofl:

Very impressive results $160 well spent pitty us Rb25 guys cant get this done

Very impressive results $160 well spent pitty us Rb25 guys cant get this done

Yes they can. There needs to be a small modification for the VCT but I have seen it done before on RB25 with good results.

this guy is a absolute champ, sent him a email today at about 12pm and got a reply now at 1:20pm.. he is going to make one up for me as soon as i pay for it... can't wait to see what sort of gains i'll get. let you guys know how it goes. :)

I don't have a dyno with AFR's unfortunatly. they were tested on the dyno and I asked for them :woot: but insted I got a printout of boost :wave:

I didn't look till after I was gone so i couldnt get em to print out another one. I did get them checked and even saw them on the dyno computer screen.

Yoshitokio is in threadbo of all places. I will email him and tell him there is some interest on this site.

i did a similar thing....

bought a copied chip of someone off this forum who had similar mods to me minus the cooler for $50, took to my mate to get the cradle soldered in and wham bam thank you maam ive got more power, response, economy and speed cut removed, higher rev limit etc etc...

very happy

he gives u a preset tune depending on the mods u tell him you have and then u take it down the dyno and make sure its safe ?

im pretty sure thats how it goes down dude.

hes guessing from another state.

i dont know squat about tuning but i always assumed each car is different and u needa get it on the dyno and adjust stuff in realtime.

but yeah i dont know shit.

Yep is is tuned for the mods you list. and you then go by your self to the dyno to get it checked, He guaranteed me if i didn't get a power increase he would write another tune for me after seeing the dyno sheet.

You can get upto 3 seperate tunes sent to you, dyno all 3 and keep the one that suits your car best and send the other 2 back but it costs a bit extra. He was confident he would get it right first time and he did.

I have gone through a full tank of gas since the tune and got 460km's to the tank. that was slightly less than i normally get 490kms. But I put this down to my heavier right foot!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
    • @Stringycheese  Have you only gone to the one blue slip workshop?  There will be a heap of them where ever you live, good odds that the next place you go to will pass the car.  Unfortunately (or fortunately?) every blue slip / engineering workshop will be different and will be happy passing or failing different things - despite working from the same set of rules. It's kinda like 2 lawyers arguing over a piece of legislation, each saying their interpretation is correct. Might seem strange that this happens when it comes to getting a modified car passed, but this is very much a thing. A big part of the game is finding an engineer / workshop that is on the same page as you.
    • Bah. I daily mine. ~60km per work day, 10-12 thousand km per year. What's the point of having a dirty old Datto and leaving it in the shed. It needs to be driven and enjoyed while the govco allows us to do so. It will only be a few years before we're forbidden to even start up internal combustion engines.
    • Judging by that spring perch and the normal looking spring on it - not a coilover. Well.... it is a coilover, just a stock format coilover, rather than what everyone calls a coilover.
    • Yes it is. We get stock from Nismo directly. I'm happy to take photos/video of it as proof before I ship it with timestamps or whathaveyou.
×
×
  • Create New...