Jump to content
SAU Community

Recommended Posts

getting a 2 way might not be that bad. U might have scored a Pro LSD which u can adjust the preload on it....which is the same diff i have :D

How much preload variation can you get on this? Does it use the stock inner C/V joints / stub axles? Can you get alternative ramp angles for it? Was thinking of getting one of those! Cheers

Link to comment
https://www.sau.com.au/forums/topic/118708-nismo-lsd/#findComment-2191520
Share on other sites

from memory 4kg, 7kg, and 12kg preload (ie soft medium and hard) Mine uses (in r32 gtst) stock everything. It should come with new stub axle bearings too in a new kit? Im not sure but mine was a complete overhaul done. Only thing is i want a ratio change now so im swapping to a 3.9 r200 shortnose crownwheel and pinion :D

Link to comment
https://www.sau.com.au/forums/topic/118708-nismo-lsd/#findComment-2191558
Share on other sites

from memory 4kg, 7kg, and 12kg preload (ie soft medium and hard) Mine uses (in r32 gtst) stock everything. It should come with new stub axle bearings too in a new kit? Im not sure but mine was a complete overhaul done. Only thing is i want a ratio change now so im swapping to a 3.9 r200 shortnose crownwheel and pinion :D

Thanks for the speedy reply! Are they available in both 1.5 and 2 way? Any idea if the ramp angles are available in alternative configurations for 1.5 way? Cheers.

Link to comment
https://www.sau.com.au/forums/topic/118708-nismo-lsd/#findComment-2191609
Share on other sites

I'tll only step out if you want it to ie dont pop the clutch on a down change. If you are braking hard, push the clutch in and hold it (like u normally do)

Ive had to do an emergency brake before (some moron pulled across infront of me, then stopped) and i clutched it and braked at the same time. It stopped like a normal car would.

People seem to worry too much with these diffs....

Link to comment
https://www.sau.com.au/forums/topic/118708-nismo-lsd/#findComment-2193606
Share on other sites

dude. take a pic of the damm thing about 3inches away from the whole!!!

i cant see shit in that photo. :starwars:

like phatr32's pic kthanx

whats this diff (its in the front of our GTR)

sorry for the lame pic...its the best i could do

diff.bmp

Link to comment
https://www.sau.com.au/forums/topic/118708-nismo-lsd/#findComment-2198381
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...