Jump to content
SAU Community

Recommended Posts

Thats a saloon you idjut

+1

The salon is just a boating term for lounge really, just like the head, which comes from the ancient practice of going to the head of the boat and hanging the freckle/tackle overboard to take a dump/slash (someone might get the hidden joke there)...... :rofl:

Rivieras are way cool, but a bit like a hotel you don't want a wild party in because everything is so expensively finished.

Mine is a custom Bruce Roberts Waverunner 38B made 40ft long with rear pods. The styling is a little dated compared to the Rivieras but I can live with the massive amount of space it has instead. It was mostly finished by a professional builder who got sick and couldn't work, sold to a guy that did a bit but found it was taking too much time and money and I got it for a third of what has been spent so far. Still needs motor, steering and rudder but should be pretty easy. Full cedar interior, 2 staterooms, salon, kitchen, head, 3 decks for lounging on plus I'll setup a marlinboard/swimdeck and dive bottle/gear storage and compressor for fills.

Nice!! Just pulled up his site before, the floor plans for the 38A are pretty open. You could say, family/drunk mate(s) friendly :D haha. I’d assume the A and B are much the same? As I couldn’t see any listings for B’s.

Going to keep it down to Gold Coast?

Nice!! Just pulled up his site before, the floor plans for the 38A are pretty open. You could say, family/drunk mate(s) friendly :) haha. I’d assume the A and B are much the same? As I couldn’t see any listings for B’s.

Going to keep it down to Gold Coast?

The aft well deck on the B is enclosed to make a stateroom. nice big one too and so the rear deck sits on top of that for drunken sunning and napping.

This site shows the B http://www.bruceroberts.com.au/power/wr38.htm

And this one as well http://www.bruceroberts.com/public/HTML/de...description.htm

I'm just looking at keeping on a mooring at Rudi Marrs' as some of the other places are pretty expensive. They have a storage area for tenders and it's really just somewhere to park it until you use it. If I was going to spend time living aboard I'd put it somewhere nicer though.

The aft well deck on the B is enclosed to make a stateroom. nice big one too and so the rear deck sits on top of that for drunken sunning and napping.

This site shows the B http://www.bruceroberts.com.au/power/wr38.htm

And this one as well http://www.bruceroberts.com/public/HTML/de...description.htm

I'm just looking at keeping on a mooring at Rudi Marrs' as some of the other places are pretty expensive. They have a storage area for tenders and it's really just somewhere to park it until you use it. If I was going to spend time living aboard I'd put it somewhere nicer though.

Can’t believe I didn’t even see the B straight under the A listing, lol. I didn’t have my glasses on, clearly.

Edited by Nismo_Boy
so did u get a lizard

Never rang the EPA about a license as it doesnt look like you can keep a moniter in Queensland, plus I won't have a place to keep it if dad ends up working at Riviera, which is obviously on the Gold Coast

Will you be moving to the coast josh is your dad goes to riviera?

I’m not sure. I like the Gold Coast better then Brisbane. But Bris has more to offer in terms career in my opinion. Just seems to be more jobs for bigger companies. Obviously exceptions to this rule… But yer lol

I probably wouldn’t and use the time as a brake, then move back in realistically..

There in Coomera, so I think he is talking about living around the Helensvale to Hope Island end of the Goldy

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...