Jump to content
SAU Community

Recommended Posts

You put an RB in there :P

well played!

This guy, he knows.

I am a panel beater NIck, I am very good at getting into cars with locked doors, doors that will not open due to damage ;)

I like this. A lot.

I'm at the German club :P it's in the background

Because he's one of the cool kids.

Was in bed about to go to sleep and get a phone call from captain. Asking if I had jumper cables as the abomination wouldn't start

Forgot to replace the battery when you put the RB in?

To give an idea no foot stall just tramping it from nothing with no brakes it goes straight to limiter in first and second and drops two 80m lines

This is what an RB does.

Just picked Kathryn up....

Sucks to be you. Where is #

sup mic :P

Bloody quiet in here so far

#@luke gtr

#@Plattsy

#@Frosty

#@Sabbi

#@FineLine

Where's my tag you prick!

Truth!

Was difficult to get out of bed at 6am this morning though :S

Werd.

well played!

I like this. A lot.

Because he's one of the cool kids.

Forgot to replace the battery when you put the RB in?

This is what an RB does.

Sucks to be you. Where is #

Where's my tag you prick!

Werd.

Your tag is there on the other page, you musta deleted it urself :P

Mine however, does not exist....

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...