Jump to content
SAU Community

Recommended Posts

Hey,

I'm from Skylines Downunder in NZ... Moving over to Oz very shortly so just wanted to say hey etc...

Here's some pics of my GT-R...

174605bb20050219P01_JFR.jpg

175217aa20050219P01_JFR.jpg

193656aa20050222P01_JFR.jpg

182548aa20050219P01_JFR.jpg

175938aa20050219P01_JFR.jpg

Cars looking good Anguss!! All the best with moving to aussie!! Are you still keeping the R or selling it before you move??

I can't sell it lol.

More like I don't want to! I've got more plans so i'm going to store it in NZ until I get back!

Plan is to move to Oz for a couple of years and then move back to NZ depending on how things go :(

Here's some more of the engine bay, i'm sure I have better ones somewhere but not on this work PC sorry..

182705aa20050219P01_JFR.jpg

182753aa20050219P01_JFR.jpg

20050324aa191946P02.jpg

Sorry guys, don't really have much on this PC...

Will put some more on later if you's want :D

Edited by Anguss

It's she pretty :thumbsup:

post-28928-1152519869.jpg

Mags are Nismo japanese lightweight racing rims 17inch. They are light weight japanese racing. Looks good and makes it go faster BONUS. I didn't put them on so i don't know what they are called

As for the kit. It was also on it when i got it. If you like that view, wait til you see the rest of it Once I get it back I post some more pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...