Jump to content
SAU Community

Recommended Posts

dont have any pics that i would really want t put up here but meh, the ones i took with camera were quick and are crappy angles and what not, and the decent shots were on a mates phone so are not great quality :thumbsup:

but heres some until i get out to a nice undercover car park :no:...

post-22805-1161141466.jpgpost-22805-1161141497.jpgpost-22805-1161141557.jpgpost-22805-1161141574.jpg

Still have to get the bar resprayed...but fresh paint...striaght to the race track to get plenty of stone chips :dry:

gallery_462_50_12190.jpg

gallery_462_50_98985.jpg

gallery_462_50_36200.jpg

The only place you can really enjoy these cars :P

Car is going back to get bar resprayed now the rally is over and get the spoilers put on...then to get bigger tyres for the new LMs and get some nice pics while she is still in one piece :(

Here it is with the old paint...nbew silver is sooo much nicer :)

462Roy_Turn_2.jpg

462Drags_Side_burnout.jpg

462DSC07641.JPG

462After_Engine_Pic.jpg

Interior.jpg

Like all 32 owners...i really love my car :)

What's wrong with the rear of it? And "Mr Burns" was trying to make a video on his phone I think. I think it was a little difficult though.

I don't like the lights on 4 door 32's. Although your's does look tough. But standard they look sh!thouse.

you goin for 1 straight color or a pearl or a flake or what :) ?

i wanna know if anyone has a black/red chameleon, i rekon that would look hot !

Not sure yet i work at a panelbeaters so any colour is possible

Nick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...