Jump to content
SAU Community

Recommended Posts

That's hot man but your front bar looks warped?

What sizes and offsets are those wheels?

Yeah it is a bit, looks worse because the photo is shot pretty low. Brought two of them for $250 and sold one for $400 so I'm not to fussed.

The wheels are:

Rear - 18x9.5 +18 215/40

Front - 18x9 +13 215/40

took a couple shots this arvo and tonight, heres a few i mucked around with. Hard trying to get them looking nice without going too far :S, not sure if i did or not.

I included a few of the crappy night shots so i can get some advice :ph34r:

post-22805-1226068188_thumb.jpg post-22805-1226068202_thumb.jpg post-22805-1226068215_thumb.jpg post-22805-1226068228_thumb.jpg post-22805-1226068239_thumb.jpg post-22805-1226068355_thumb.jpg

oo very nice!

How did you get your black paint so shiny in the first pic?

Yeah it is a bit, looks worse because the photo is shot pretty low. Brought two of them for $250 and sold one for $400 so I'm not to fussed.

The wheels are:

Rear - 18x9.5 +18 215/40

Front - 18x9 +13 215/40

I can't believe you managed to stretch 215's onto a 9.5" rim. No tyre shop I know would do that and I know people that work at one!!

I can't believe you managed to stretch 215's onto a 9.5" rim. No tyre shop I know would do that and I know people that work at one!!

I was running 215/40/R17 on the front of my XD9s which were 17 x 9.5 + 17 and 225/40/R18 on the rear 18 x 10 + 18 :banana:

Some serious stretch

Here's a couple shots of how the wheels sit and tyre stretch, still need to sort front and rear camber. Was running 225/40 before these but they were rubbing quite a bit, might just be the design of the tyre there might be a 225/40 out there that fits a little better.

DSC_0018.jpgDSC_0026.jpg

Here's a couple shots of how the wheels sit and tyre stretch, still need to sort front and rear camber. Was running 225/40 before these but they were rubbing quite a bit, might just be the design of the tyre there might be a 225/40 out there that fits a little better.

what size and offset on those rims? look tuff!

Front - 18x9 +13

Rear - 18x9.5 +18

You should be able to get away with that on the back

I had 18 x 10 + 18 on the back of my R32 with 235/40 tyres. The inner lip on the guard was rolled and we slightly pumped/flared the whole guard, not to much but just enough to tuck the wheel under

Fron't I had 17 x 9.5 + 17 with a 235/40 tyre and same deal, guard liner removed with the inner lip rolled and guard slighly pumped/flared

xd9close.jpg

Man, you guys all freak me out with the size wheels you are jamming in under the GTSts. I want to run a 9.5" , maybe 10" rear but only because i want to run a 265 rear tyre :down:

Anyway, the car has 9" +20 offset which should be doable and when the guards have been pumped for that sized rim i should be able to get a 9.5" + 36 on the rear aand run 255 tyres.

Is anyone running wide rims with decent sized rubber?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...