Jump to content
SAU Community

Recommended Posts

i have been offered a set of porsche brakes off a boxter s i think. there supposed to be the same as carrera brakes. i have also been told that they are a direct replacement for an evo 8. are they able to fitted to my gtr or dont bother with them.

Link to comment
https://www.sau.com.au/forums/topic/120146-porsche-brakes/
Share on other sites

you should be able to fit them..

Chris's I WIN GTR has porshe 8 pot brakes fitted

What Porsche has 8pot brakes???

Also if they lug type calipers they could be a lot harder to fit then radial mount type. Also keep in mind that Boxters dont use very large rotors, so depending on the rotor you want to run it may impossiblel to fit them...just do your homework !

Link to comment
https://www.sau.com.au/forums/topic/120146-porsche-brakes/#findComment-2213693
Share on other sites

Ive heard that once a set of porsche brakes have been 'heat cycled' they start having issues with uneven clamping pressure as the caliper start to warp and buckle. Apparently when someone is selling off second hand porsche brakes it can mean they are rooted.

Thats what the gt3 guys say around the track.

Link to comment
https://www.sau.com.au/forums/topic/120146-porsche-brakes/#findComment-2214618
Share on other sites

Carrera GT

Ok, so they look to use the generic 8 pot Brembo that sees use on the Audis, AMGs, Lambos etc. In which case they are radial mount and pretty universal to bolt on to other cars

The boster calipers i have seen are all lug type, so would depend ont he rotor sze you plan to run whether a bracket could be made for them.

...woudl need research, sould work well, but lookign at what the calipers are and the rotor they use, i think the more common pgrades could be more suitable

Link to comment
https://www.sau.com.au/forums/topic/120146-porsche-brakes/#findComment-2218241
Share on other sites

Most calipers can be mounted to any vehicle with the right radius rotor and brackets ,we do this alot .The other thing to remember is alot of porsche calipers for sale are off race cars and if they need to be reconditioned and have pads they become very expensive this is why these guys just buy new ones.Some 6pot calipers the pads are over $600 dollars to replace and the repair kits are the same especially if you need new pistons.

Edited by PMATT
Link to comment
https://www.sau.com.au/forums/topic/120146-porsche-brakes/#findComment-2222832
Share on other sites

Ive heard that once a set of porsche brakes have been 'heat cycled' they start having issues with uneven clamping pressure as the caliper start to warp and buckle. Apparently when someone is selling off second hand porsche brakes it can mean they are rooted.

Thats what the gt3 guys say around the track.

exactly, the porsche 6 spot monoblock calipers warp pretty easily on the track, and they are cheap to replace about 800 a side.

Im sure the boxter brakes are a different story

Link to comment
https://www.sau.com.au/forums/topic/120146-porsche-brakes/#findComment-2224131
Share on other sites

exactly, the porsche 6 spot monoblock calipers warp pretty easily on the track, and they are cheap to replace about 800 a side.

Im sure the boxter brakes are a different story

Correct. We recently did the brakes on our 996 cup cars. Kits, including the pistons, were $500 per side. Makes sense to just throw the whole caliper on.

Link to comment
https://www.sau.com.au/forums/topic/120146-porsche-brakes/#findComment-2224441
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...