Jump to content
SAU Community

Recommended Posts

  • Replies 242
  • Created
  • Last Reply

Top Posters In This Topic

I've got an auto as well and manage to get 400km on a tank before I cave in and get some fuel, at this stage it's been sitting just above the 'E' for a while now. This is done on 'grandpa' city driving with full exhaust, FMIC, EBC, pod and piggy back ECU.

I used to only get 250km's from absolutely-full-tank to just above the 'E' mark. I just changed my O2 sensor and then I could reach the magic 400+ mark, then I got my ECU tuned and things seem to have improved a little more still.

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2474655
Share on other sites

I've got an auto as well and manage to get 400km on a tank before I cave in and get some fuel, at this stage it's been sitting just above the 'E' for a while now. This is done on 'grandpa' city driving with full exhaust, FMIC, EBC, pod and piggy back ECU.

I used to only get 250km's from absolutely-full-tank to just above the 'E' mark. I just changed my O2 sensor and then I could reach the magic 400+ mark, then I got my ECU tuned and things seem to have improved a little more still.

cool thanks :P yea had my oxy sensor done 5 000km ago too

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2474989
Share on other sites

hay guys, i replaced my 02 sensor today with an NGK item, and i had a long discussion with the bosch guys down here in tas. THE EL FALCON O2 is not anywhere the same, but somehow it manages to work, the heating element is different, and the output thershold is different.

I have noticed a BIG difference in the NGK item, the sensor is simmilar to stock but has different inside parts. I also replaced the ECu temperature sensor, the car is sooo much better now, going to see how it goes with the fuel economy.

I also replaced the plugs gapped to 1.1mm and i have to change them back to .8. It deffinatly pulles better with .8's

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2475702
Share on other sites

I put in $50 or 34L on Wed and got 250kms out of it - (run down to red light). I have an auto fairly stock 33 running 190HP on stock boost... Is anyone else in an auto getting the same?

Gees! you must thrash it round! ;) I always get over 400kms, today I got 430 odd! (auto)

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2476026
Share on other sites

' date='8 Sep 2006, 09:28 PM' post='2475808']

how big is an r33 gtst tank?

i fill up around 270-300km and i get around 40L in

thou im running over 300hp with 11:1 afr, and hit the limiter constantly on most days hahha

Should be about 65L tank, and you should stop puttin that foot down so much man ;) I got 58L in mine today, I did run it down bit more than usual.

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2476027
Share on other sites

Should be about 65L tank, and you should stop puttin that foot down so much man :) I got 58L in mine today, I did run it down bit more than usual.

ohh thanks for that pulp ;)

i think i can push it alittle bit more than to 350km... my fuel gauge doesnt work the best so i dont want to all the sudden run out of fuel ahaha :)

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2476037
Share on other sites

I get around 450km out of 50L with my RB30E+T only mods are 3" catback and pod, I'm pretty happy with that, it's f**kall, if anything more than when it was NA

I Just filled up my car for the first time with the rb26 in and only got 235 kms out of the tank!!

i was shocked my fuel consumption halfed from the rb20. Im still running it in so i wasnt thrashing it. Im running a microtech ecu, is something wrong? do i need to retune or is this the reality of an rb26 running 310 rwhp ?

It's the Microtech, it doesn't have closed loop (unless new ones do?).

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2477374
Share on other sites

I get around 450km out of 50L with my RB30E+T only mods are 3" catback and pod, I'm pretty happy with that, it's f**kall, if anything more than when it was NA

It's the Microtech, it doesn't have closed loop (unless new ones do?).

closed loop? whats that?

Its the Lt 1200 model. running MAP

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2481342
Share on other sites

The O2 sensor controls fuel mixtures when cruising, to give good fuel economy, The Microtech doesn't use this and is rich all the time, not just when when flogging it, not flogging it would still use less fuel but not as much less.

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2486675
Share on other sites

Arr ok. Interesting.. Wish i knew that before haha.

have spoken to someone else with a rb26 running microtch and they are getting mor like 300 km/tank heading back to rotomotion for a retune i think, unless anyone would recommend someone else who knows microtech well.

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2488059
Share on other sites

  • 2 weeks later...

play r 32, you should probably invest in a wideband sensor like this

Although you don't have closed loop, you should still be able to adjust your fuel maps so that when your cruising your sitting on an AFR of 15 or so to conserve fuel. Just get a mate with a laptop and go cruising :happy:

I'm guessing your tuner probably only did a WOT tune if your using that much fuel :laugh:

EDIT: Just forgot, my record so far is 8.9L/100km with a fair bit of nanna driving. I got 470km off 42 L... gotta love the RB20 :laugh:

Link to comment
https://www.sau.com.au/forums/topic/120328-fuel/page/7/#findComment-2539536
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...