Jump to content
SAU Community

Recommended Posts

With regards to SEVS, that strictly with regards to private imports? Nissan OZ will be able to sell it here earlier than 2 years after Japan yeah?

Be careful what you wish for.

If Nissan of Australia release the GT-R straight away, that completely eliminates any possibility of a SEVS workshop getting approval to import, meaning no cheap imports!

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

The price estimate is the first thing to laugh at and even if the price as quoted is true the list of people wanting one will drive the price up even more.

If Nissan bring the car in it will have be in the $200,000 if full volume or they will bring in as per Mitsubishi did with the EVO to keep price down.

The car has to be sold in Japan for 18 months to allow the car to come in under RAWS or as a New Vehicle under SEVS.

After the R32 GT-R do you think Nissan will make the same mistake twice......

If Nissan of Australia release the GT-R straight away, that completely eliminates any possibility of a SEVS workshop getting approval to import, meaning no cheap imports!

But it will have full dealer support, and it means that the car will be able to compete in the mainstream magazines' PCOTY, BFYB, etc to really rub it in the face of the locals and the Euros.

And if I could afford the upcoming GT-R when it comes out, I'd rather have it brand new with genuine double digit figures on the odo than a slightly used one.

Nice but needs to be less pit bullish. It's lost the sleek bullet feel you get from a 34 - although it could be because of the magazine aspect.

The R34 was sleek? I think we may have different definitions of the word "sleek".... :(

Anyway, I read an interview on another site (if I can find the source I will) and they said that they didn't want the car to look like an ultra-aerodynamic mobile ramp like other supercars (specifically something like a Ferrari or Lamborghini).

The GT-R is meant to be a wide shouldered, tough looking car. Its meant to look like a bruising pitbull or doberman rather than a greyhound or a whippet. That's the look they want the car to have, which is why it doesn't look like a space ship.

it doesn't share anything with the current V35 Skyline (chasis wise) - there won't be a lower spec model, as there has never been with any other GTR.

That's in regards to say single turbo etc, it's going to be a Nissan GTR - how can you have a single turbo Nissan GTR? From the Skyline line-up, yes, GTS-T, GT-T - but this is not a Skyline.

:( Umm have a closer look at the rear of the car... It has a gigantic skyline logo on it.... Thats why I speculated the possibility of say maybe a GT-t.

Up until now all I've heard from Nissan and the media that they are two different models from here on out... but the photo says otherwise.... just my little observation....

Will be interesting to see the power the jap tuners get out of it 1500hp :ermm:

for it's price it will be in competition with all the euro exotics (considering you could buy 5 for a lambo) and way out of any other Japanese manufactures league.

It will be THE car to own

Hmm.

I somehow reckon this is a fake. The fact that it has SKYLINE written across the back throws me off... EVERYTHING ive read, even when the pres of nissan spoke he said "this will NOT be a skyline, it will be a GTR"

I like the front, very TVR Sagaris. The rears a little high and the wing is gay, but thats probably just the photos.

I find it interesting that a magazine has photos / information about this car even before the GTR Proto website has reopened

-> http://www.gtrproto.com/

Also, anyone notice the "?" in the title?

Finally, as far as i've read reliable information, this car is being released by nissan WORLDWIDE. This includes Japan, Europe, America and Australia. It will be a worldwide supercar. Two firsts for a skyline, being a supercar and being world wide sold (neither of which it has been before)

You guys think its hot in those crummy photos. Wait till you see it in the real flesh. I reckon I'd be picking up my jaw off the ground!

Kudos to Nissan, a car worth waiting for! Well... its been a long time though.

Also I wouldn't comapre it to the 997 Turbo. The Porsche is double the price, so you'd expect it to be better.

why do people keep comparing the GTR with a porsche, this cars gonna blow the porsche away in looks and performance.

you seen one porsche you seem them all, they have had the same boring shape for all those years each time just upping the hp up a bit, do a few cosmetic changes and call it a new model

why do people keep comparing the GTR with a porsche

Because Porsche constantly set the benchmark for sportscar handling and performance

this cars gonna blow the porsche away in looks and performance.

Looks are subjective and you can make up your own mind there. But performance is less so. The GTR would not outperform a 997 911 Turbo stock vs. stock. The 911 has more power, less weight, and a better weight distrobution for straight line stuff. Plus the rear engine plus all-wheel-drive gives the Porsche unparallelled traction out of corners. And the lower centre of gravity and low inertial for the front wheels gives it potentially better handling character. The smaller frontal area and superior aerodynamics give it better top end.

However, from a price point of view, the GT-R would be competing with the Porsche Cayman (13.X second 1/4 mile), which indeed it would out perform from a raw numbers point of view. But could it match the feel and passion of a Cayman?

you seen one porsche you seem them all

Perhaps you aren't paying enough attention - the difference between one generation to the next is always under the skin.

they have had the same boring shape for all those years each time just upping the hp up a bit, do a few cosmetic changes and call it a new model

Again, you aren't paying enough attention. If you for an instant think the differences between the 993 and 996 models are purely cosmetic, with only a small hp increase, then you are sorely mistaken...

The Porsche 911 sets the benchmark for sportscar performance. Surely to even be compared to the flagship turbo model, with an asking price around half of what the Porsche is, should be one of the greatest compliments the GTR could recieve? It doesn't need to beat the Porsche - merely to get near it at half the price will make the GT-R special enough for me!

However, from a price point of view, the GT-R would be competing with the Porsche Cayman (13.X second 1/4 mile), which indeed it would out perform from a raw numbers point of view. But could it match the feel and passion of a Cayman?

Umm are you joking?

The Porsche Cayman is a compromised model to suit those wanting more than the Boxter and that cannot afford a 991. The only reason that car is there is too fill holes in the marketing department!!

I recall Top Gear bagging it because whilst it was smooth and did things alright that it did indeed lack the Passion you so speak of.

Point to point around the Top Gear test track my money is on the new GTR eating the Cayman, and the presenters making a general point thats way more generous and encouraging than the Cayman.

Nissan has a problem, Skylines are not sold worldwide. So they HAVE to keep the GTR away from the Skyline name. Otherwise they will have people asking for the “other models” of Skyline. The economics of it are such that if you do one model you might as well do a selection of the rest.

The real problem for Nissan in Australia is the R32GTR bombed, big time, they forgot it was a “hero” car. The idea being that you don’t make a lot of money selling the “hero” car by itself, you make the money selling the lower spec models that live of the hero’s name. So if they sell the GTR as the “hero” Skyline then they need the other models to make the money.

Let’s face it we all know Nissan in Australia should drop the front wheel drive Maxima and sell Skylines instead. Then, and only then, does a Skyline GTR makes sense.

I don’t really want to go into a Nissan dealer to buy a GTR, or get it serviced, and have to wait in line behind some low life with a Tiiga. That’s why Toyota has Lexus, Honda has Acura, Nissan has Infinity, Subaru have designated STi dealers and Mitsubishi have Raliart dealerships to sell Evo’s.

Nissan has a problem if they want to sell GTR’s in Australia, and based on past experiences, they have no idea how to solve it. I know, but they won’t be asking me.

:laugh: cheers :D

Edited by Sydneykid
Umm are you joking?

The Porsche Cayman is a compromised model to suit those wanting more than the Boxter and that cannot afford a 991. The only reason that car is there is too fill holes in the marketing department!!

I recall Top Gear bagging it because whilst it was smooth and did things alright that it did indeed lack the Passion you so speak of.

Point to point around the Top Gear test track my money is on the new GTR eating the Cayman, and the presenters making a general point thats way more generous and encouraging than the Cayman.

Agreed the Cayman doesn't have the passion of the 911. But still, I doubt the GT-R will match the steering feel and feedback that the Cayman will give. The Cayman will feel more like a sportscar than the GT-R.

And I already said that on raw performance the GT-R would be faster than the Cayman, so a giant fat balding overly-cynical Brittish git driving hamfistedly around an airport doesn't prove much. >_< Even less telling would be if a short white toothed daytime television hosting Hamster were to do it instead :(

(P.S. I am the Stig)

Edited by Big Rizza

Back when Porsche first developed the current shape they announced that this was the best design model for drag co-efficency and I recall thinking ATT "one day most sports cars will have to have this shape to at least compete" and if you look at alot of the faster cars they do follow that design concept, sure they differ because they have to and if I had to say "the new GTR looks like" (just from that one pic) it would be the Vanquish.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Any update on this one? did you manage to get it fixed?    i'm having the same issue with my r34 and i believe its to do with the smart entry (keyless) control module but cant be sure without forking out to get a replacement  
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if something was binding the shaft from rotating properly. I got absolutely no voltage reading out of the sensor no matter how fast I turned the shaft. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if shttps://imgur.com/6TQCG3xomething was binding the shaft from rotating properly. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
×
×
  • Create New...