Jump to content
SAU Community

Final Turbo Decision

ICER33

By ICER33,
in Engines & Forced Induction

 Share

Recommended Posts

jazza08 Mentor

jazza08

Posted
Posted

Are you sure??

There was a thread that showed a gcg hi-flow making 260ishrwkw and putting on a vg30 rear housing and making 280rwkw (not exact figures).

So wouldn't this suggest a vg30 is bigger? I cud be way off here but i thought thats what i read.

Bass Junky Grand Master

Bass Junky

Posted
Posted

hey ppls.

I'm making 250rwkw (with more than 240 for about 2000rpm) on the GCG high flow with poncams (260 x 9.15)

Flapped valve was loose so boost response was ordinary. Fixed flapper valve, boost response is now awesome! I can make full boost in 3rd at 3000rpm. Well, 1 bar, and I run 0.9 bar to make 250.

Once the new clutch goes in, I'll be taking it back to the dyno and having it fine tuned again to try to pick that number up a bit.

I've got all supporting fuel mods and blah blah blah.

BASS OUT

Sydneykid Grand Master

Sydneykid

Posted
Posted
GCG state on their website that they don't do group buys.

Tell me about it, it took me a year to organise. Finally I had to arrange it via Jamex (a GCG, Whiteline and Bilstein reseller) and they only did it because of the good response from the suspension Group Buy.

:whistling: cheers :P

bloodsword27 Veteran

bloodsword27

Posted
Posted
I've got 255rwkw at only 0.9 bar so 260 not out of the question. I have the GCG highflow btw.

I've run 12.7's

Car is an auto.

$500 for a second hand R34 turbo.

GCG state on their website that they don't do group buys.

mate ..if onli u told me i would have bought that turbo!!!....blew my MTQ hi flowed one :yes:

how do the MTQ hi flowed ones rate anyways?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...