Jump to content
SAU Community

Recommended Posts

Hi people,

Tony hasn't put the second page of the entry form up. It's the part that needs signing so it's the important bit.

We've told him and it should be up later today/tonight.

Regards

Andrew

Ok, as we are operating under AASA at Winton, we don't need the usual signy signy bit for the entry form. So the documents on the WRX Forms are correct.

Let the entries flow....

Regards

Andrew

  • Replies 128
  • Created
  • Last Reply

Top Posters In This Topic

You going to throw the brakes on Dane? Im interested to hear your thoughts

I'm not sure yet Troy, if I get a chance to get them on I will, so here's hoping.

I'm not 100% that I'll even make it. The second hand box I just put in my car has a chipped tooth... FARK

It drives alright but the synchro from 3rd to 4th is gone, so I'm a little worried about smashing it at winton... Are you bringing the Tow truck Jack?? :)

I'm not sure yet Troy, if I get a chance to get them on I will, so here's hoping.

I'm not 100% that I'll even make it. The second hand box I just put in my car has a chipped tooth... FARK

It drives alright but the synchro from 3rd to 4th is gone, so I'm a little worried about smashing it at winton... Are you bringing the Tow truck Jack?? >_<

Sure am Dane, plenty of room for you!!!!

ahhhh you're are an absolute lifesaver Jack!!! :D

Now hopefully I don't need you to save me... :(

I'll send in my entry tomorrow.

How are the Alcon's??

Alcon's are doing fine, the rears should be ready in 3 weeks...

So what's this upgraded brakes you have?? :huh:

Alcon's are doing fine, the rears should be ready in 3 weeks...

So what's this upgraded brakes you have?? :(

ahhh nice, nice, can't wait to see those bad boys!

I've borrowed Troy's spacing kit for the front calipers so that I can accept a 324mm rotor with the stock calipers. Just going to see whther it is what I'm looking for, and if it is would be a fantastically cost effective solution, so here's hoping.

Matt: sweet. I'll see how these go and have a chat to you about them :P

I've got a few things to check over the weekend. If everything is fine ill be putting my entry in on Monday.

I think i'll need some new tyres. I don't really want to use my semis, but if i do use them will i need a harness since ill be in modified?

muhaha Nick's entering the fray! w00t. nice one.. good to see another modified 4wd in the mix ;D

Tom, only "heavily modified" skylines aparently require a harness.. why dont you want to use semi's?

This will be my first trip to winton in the 34! can't wait.

muhaha Nick's entering the fray! w00t. nice one.. good to see another modified 4wd in the mix ;D

Tom, only "heavily modified" skylines aparently require a harness.. why dont you want to use semi's?

This will be my first trip to winton in the 34! can't wait.

It's good for drifting at Winton :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...