Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just a question for anyone with an R33 GTR. Where did you guys get your Oxygen sensors from if you have replaced them, and how much did you pay for them??

I cant see the value in buying them from nissan for a total of $450. I just want some universal ones that i will adapt my old plugs to, but havent had any luck finding some over the last 2 weeks!

The specs are: 18mm thread, Titania Sensor, Three Wire, voltage range of 0 to 1 volts.

As you can see from the pic, my car is a 32 GTR, but i am running 33 dumps, which have the larger thread. So alternatively, if anyone knows where to get the bungs from to run the smaller 12mm thread 02 sensors from that would be great. (or even if you know of where to get them fabricated in Brisbane).

Thanks Guys, im beginning to get desperate!! :D

SLVR32GTR

Edited by SLVR32GTR
Link to comment
https://www.sau.com.au/forums/topic/123107-gtr-02-sensor-cheap-alternative/
Share on other sites

hey man, im in the same boat.

i asked this question a little while ago, but didnt get any answeres!

hopefully someone can help us!

steve

I know what you mean, i have been asking all of the reputable performance shops around Brisbane, also NGK and what not, and all i have recieved back is, "ahh sorry we dont have them or even know where to get them!"

Gets a tad annoying considering i need them in order to do my long awaited turbo conversion!

Surely someone on here has a 33 GTR and has changed there 02 sensors!

G'day blokes,

Changed my GTR 33 sensors 2 months ago. Cost me $339 for the pair from Nissan(genuine at trade price). I went through the long drawn out process of looking, phoning and eventually talking to technical specialists at most aftrmarket places for replacements. No luck, not made for direct fittment.

G'day blokes,

Changed my GTR 33 sensors 2 months ago. Cost me $339 for the pair from Nissan(genuine at trade price). I went through the long drawn out process of looking, phoning and eventually talking to technical specialists at most aftrmarket places for replacements. No luck, not made for direct fittment.

Hehe,

I thought that this would be the response. I suppose i am just suprised that nissan succeeded in making absolutely every part for a GTR the hardest and most expensive parts to come by! :D hehe

Ohh well, i suppose $339 isnt toooo bad.

Thanks mate.

Oh and for the record, i even went as far as contacting specialised dealers in NZ and the UK with still no luck!! Unbelievable.

If the GTR uses normal Zirconia type Oxygen Sensors (like the RB20/25), which im sure they would, then just buy a universal sensor with 18x1.5mm thread (standard O2 sensor thread) and you cut the connector and wire from the old sensor and crimp it onto the new universal sensor. (it will come with the crimp terminals and everything)

Universal sensors are around $40 - $80 at most.

You can't solder Oxygen sensor wiring as its stainless. (Thats why they supply crimp connectors with the sensor)

If the GTR uses normal Zirconia type Oxygen Sensors (like the RB20/25), which im sure they would, then just buy a universal sensor with 18x1.5mm thread (standard O2 sensor thread) and you cut the connector and wire from the old sensor and crimp it onto the new universal sensor. (it will come with the crimp terminals and everything)

Universal sensors are around $40 - $80 at most.

You can't solder Oxygen sensor wiring as its stainless. (Thats why they supply crimp connectors with the sensor)

Thats the problem though. GTR's (32 and 33 anyway) use titania sensors that are very hard to come accross. Basically 32 O2 sensors (12mm thread) can be bought through NGK, and nissan, but 33 (18mm thread) i have only found through nissan so far.

Talking to Sydneykid, he mentioned that a generic bosch lambda sensor should work for this application and only cost around $80. I have not researched this yet to verify though, so dont take it as gospel. These sensors are available through places like Repco.

Tony

VL Commodore and R31 use Titania 02 sensors that have the smaller thread size, have you looked into them at all?

Titaniam sensors are smaller due to their design. They are actually not a self generating sensor like the zirconum type, but a voltage reference sensor.

What this means is that instead of self generating a 0-1V output, it uses a resistor that changes resistance with the air/fuel ratio to give a 0-1V output. It uses the power from the heater 12v supply.

You can interchange them as them as they both give a 0-1V output. The only thing to note is that all Zirconia type sensors are the larger 18mm thread and Titania types are typically the smaller thread.

I have in the past, removed the bung from the exhaust manifold/dump pipe with the smaller thread for titania sensor and got a bung from like R33 dumps that have the 18mm bung and used the cheaper Zirconia type sensors on RB30 engines that originally used the Titania type sensor.

Do the GTR dumps have a large 24mm bung that is screwed into the dumps with the O2 sensor hole inside the bung? If so the bungs just unscrew.

  • 1 month later...
  • 1 year later...

Site sponsor Kudos does them HERE, but for a 32 GTR its still ~$325. FWIW R31/VL sensors are <$100.... I also need some, and i'll put them in when i install turbos and xforce dumps (which also come with reducers).

Does anyone know if all titania o2 sensors are electrically the same WRT sensor output? (and therefore theoretically adapable?)

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...