Jump to content
SAU Community

Recommended Posts

cheers, was a friends canon eos50d, 1st of the 3 photos is remarstered, the other 2 are 3-shot exposures laid over into 1 frame

but.....

the engine is farked. either piston ring or oil pump, thought it was turbo oil seal but its not turbo related; got to check it out a bit more & see whats going on (ie compression tester kit needed)

HDR attempts?

GL with the motor... did you say highdeck(sleeved/spacer plate) 3L? :)

One day i will have a nice camera and a dayz kit thx to the new job, til then all i have to say in here is nice stags all!

i think i take the cake for the worst stagea @ AJD,stock ride height,broken windscreen held together with a nirvana sticker,matte black wing and front lip

least its not white or silver....and i can drive over shit thats in my way

and the copper didnt even look twice at it!!!

i win(or lose)

dont know if this is how ya put th pic on coz iim new... nice picz every 1 would b good to c them out and about...

i see you everywhere,please wave back to me so i dont feel so gay not getting any stagea love returned :thumbsup: ,nice buy dude congrats

<br />i think i take the cake for the worst stagea @ AJD,stock ride height,broken windscreen held together with a nirvana sticker,matte black wing and front lip<br />least its not white or silver....and i can drive over shit thats in my way<br /><br />and the copper didnt even look twice at it!!!<br />i win(or lose)<br /><br /><br />
<br /><br /><br />

what you talkin bout the black bits look good... they match the black mouldings on your car... a besides like you said could be worse they could be white...

<br /><br /><br />

what you talkin bout the black bits look good... they match the black mouldings on your car... a besides like you said could be worse they could be white...

thanks mate,i know i can sometimes count on you.just dont fart anywhere near my front lip,it mite fall off.will be cable tying the shit out of it in the morning

f#cking cops is on now!

show me your hands!get down on the ground!

its nice watching others getting arrested

i think i take the cake for the worst stagea @ AJD,stock ride height,broken windscreen held together with a nirvana sticker,matte black wing and front lip

least its not white or silver....and i can drive over shit thats in my way

and the copper didnt even look twice at it!!!

i win(or lose)

man that green comes up good with a good polish !

font lip looks good too ! quit your jibber jabbing!

Hi There,

There seems to be alot of nice's ride over there(Im in NZ)

Since you have shown me yours i show you mine

m_7e52e3c2b9364547bbf7eae117fc3d08.jpg

I have had a look around and i have learnt lots about this beast from this site but Can any body tell me what this switth does? :)

m_1e5ce312175d403e8017b6f7398e998d.jpg

Mine's a 25xfour

m_8bc07bba5ab743c489dd498f40218dec.jpg

:thumbsup:

Edited by WGNMAN
Hi There,

There seems to be alot of nice's ride over there(Im in NZ)

Since you have shown me yours i show you mine

m_7e52e3c2b9364547bbf7eae117fc3d08.jpg

I have had a look around and i have learnt lots about this beast from this site but Can any body tell me what this switth does? :)

m_1e5ce312175d403e8017b6f7398e998d.jpg

Mine's a 25xfour

m_8bc07bba5ab743c489dd498f40218dec.jpg

:thumbsup:

Can't quite see which switch you mean but if its the one to the right of the steering column my car has switch for the de-icing strip along the bottom of the windscreen for unsticking frozen wipers.
Can't quite see which switch you mean but if its the one to the right of the steering column my car has switch for the de-icing strip along the bottom of the windscreen for unsticking frozen wipers.

That makes sense Thanks :thumbsup:

More/better pics here

http://www.myspace.com/p10primera

Edited by WGNMAN

Ok, some of you guys have seen the pictures the dealer took before I brought the M35. These pics were taken after she was given a good scrub, you won't see it this clean very often :thumbsup:

post-59561-1240986301_thumb.jpg

post-59561-1240986325_thumb.jpg

post-59561-1240986666_thumb.jpg

Ok, some of you guys have seen the pictures the dealer took before I brought the M35. These pics were taken after she was given a good scrub, you won't see it this clean very often :blush:

gold I say...sorry red!!!....tops buy!....you stole it.....didn't like the color until I saw yours....now I really like it.....good luck keeping it clean. :D

Ok, some of you guys have seen the pictures the dealer took before I brought the M35. These pics were taken after she was given a good scrub, you won't see it this clean very often :D

that looks awesome !!

love the colour, stands out from the grey silver ones !! good stuff

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...