Jump to content
SAU Community

Recommended Posts

I am not sure that I understand what the fuss is all about with changing rotor diameters and the effect that has on the pad shape. Sure the inside and outside radius of the pad will be ever so slightly different to the inside and outside radius of the rotor. But is it such a big deal?

The first picture Roy posted shows that he could have used a 2 mm larger diameter rotor with those pads. Noting that there is not really much of a problem with the different radii.

462FR_Caliper_Pad_Overhang.JPG

If you are currently using a 280 mm rotor (R32GTST) then you could be using pads shaped for a 280 mm rotor or a 296 mm rotor. There are far more compounds available for R32GTR’s, hence 296 mm rotor. So if you buy GTR pads for your GTST (with its new 324 mm rotors) you are only talking about a 28 mm increase in diameter from where those pads are designed for.

Hardly a big deal, since the same pads work OK on 280 mm versus 296 mm ie; a 16 mm difference.

The next step up would be to use the R34GTT pad which, being designed for a 310 mm rotor, would just about fit perfectly on a 324 mm rotor. I haven’t actual tried R34GTT pads in an R32 (GTST or GTR) calliper. But that could be the answer, to what is not really a big deal anyway.

:D Cheers :D

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I spoke to Race Brakes Sydney and they will do the 5000series 2piece for $450ea or 4000series 1 piece for $245 ea better for a group buy.They told me to have a look at the db1170 and db1199 bendix pad and you will see the pad material sits lower on one pad than the other this may or may not be the secret of pad overhang.They are also happy to organise group buys if we can get anything together let them know.They do AP kits and also have the caliper kits for the nissan 4pot calipers and 1 /16 brake master cyl kits as well.

Thankyou very much for the explanation, much appreciated and very logical!

I will get a price for the DBA 5928-1 tomorrow and see where it sits.

Cheers,

Caz.. :action-smiley-069:

Hey Caz,

Did you manage to get a price on this??

Thanks

Dane

Any word on the 33GTS25t adapters for the 324mm disc? Also would these adapters mean that you cant use your standard spare tyre on the front of the car?

cheers

Evil

Edited by EvilINGT
  • 2 weeks later...

My calliper brackets arrived the other day, they look good

1. solid construction

2. nicely machined out of the appropriate alloy

3. steel hellicoiled threads

4. High tensile allen bolts and spring washers

Picture follows;

med_gallery_1903_124_158396.jpg

I am going to use them with the DBA 5000 series rotors, which I picked up at oran Park last weekend.

Picture follows;

med_gallery_1903_124_70638.jpg

Hopefully I will get some time tomorrow to fit them onto the R32GTST, take some pictures and post them up.

:miner: cheers :rofl:

  • 2 months later...
Has anyone been incontact with caz, i have pm'd him and got no response. I am keen for a set as i have some 324mm rotors here. just a question though, will they fit under the standard 16" wheels on a 32?

not a chance

Has anyone been incontact with caz, i have pm'd him and got no response. I am keen for a set as i have some 324mm rotors here. just a question though, will they fit under the standard 16" wheels on a 32?

Do you have R32GTST or R32GTR?

Because the current kit won't fit R32GTST's, Caz is currently working on a new kit for them.

:laugh: cheers :mad:

Do you have R32GTST or R32GTR?

Because the current kit won't fit R32GTST's, Caz is currently working on a new kit for them.

:P cheers :woot:

do they work on GTRs though? that's a bit of a shame :( I thought they had been tested/developed for GTST too?

Do you have R32GTST or R32GTR?

Because the current kit won't fit R32GTST's, Caz is currently working on a new kit for them.

:( cheers :no:

Did you get the last set SK? Any idea on how long untill there is more as per your pics for the r32 gtst?

Cheers :P

  • 9 months later...

hoping this bumps gets this thread some attention....

i want to fit 324mm GTR rotors to my R33Gtst with standard callipers and need the brackets (well depending on how much they are - if they're not too expensive, for sure, if they are, well i don't think the gains will be worth it - but anywaaaaay!)

so does anyone know where you can get this brackets from and approx. cost??

Cheers

I used the Unique Autosports calliper extenders and brake scoops on the R33GTST for the recent SAU day at Wakefield with DBA 324 mm 5000 series rotors, Nismo braided hoses, Castrol Response Super Dot 4 Brake fluid and Bendix Ultimate pads. No problems locking the brakes on demand using Yokohama R tyres even after 2 consecutive 15 minutes sessions. No fade, no shudder, no problems on the day or since.

I will post up some pictures of the installation process and the finished result when I get a chance.

:laugh: cheers :domokun:

yep UAS make and sell them. sure they may not be dirt cheap but they use good materials, and have done all the testing and design work for you. www.nismo.com.au

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...