Jump to content
SAU Community

Recommended Posts

ok so i need help... my car prett ymuch died on me. lets start from the beginning. i was driving home from sydney when my speedo stopped working, now my hicas light is on and have no power steering. im fine with that, then yesterday my hicas light was on (its always on now) and it started making thumping soudns from my gearbox i think. pasenger side in the middle my passsenger said she felt it thumping. so i turned my car off. turned it on. still did it. the hicas light was flashing and taking corners would make the steering jolt wen the light was flashing (about twice a second). so i turnbed it off, turned it on did it a couple of times then it wouldnt turn on (i my battery ran flat the other day coz my stero turned on during the night ( my mate isntalled the stero and didnt hok up to accesory power) so i got a jum,pstart yesterday and all was fine till i heard beeping from my tubro timer, the battery was on 10 volts and kepped dropping and the car was loosing power. it wanted to stall at a set of lights, by this time the turbo timer said it was on 8.2 volts. i had to rev to 3k rpm jsust so it wouldnt stall. so i chucked my hhazzards on so no one would hit me and the power dropped even more would only rev to 1.5k with my foot toi the floor. it was doign the old bunny hops liek when u first learned to drive. made it to a car park and the turbo light was on. so i put my foot down and it wouldnt rev over 2k at this point and it sounded wierd. like it was bouncing at 2k rpm took my foot off the accelerator and it stalled. couldnt start again coz hte batter was f**ked. somehow got my power windows up and could smell burning. so i opped my bonnet and saw smoke coming from the back but it didnt last long. look at the pic to see where it came from. anyways had to spend the rest of my money on getting it towed home and i was gogin to go to willowbank tonight to race it. im a apprentice baker so i aint got lots of cash and hopeing it wont cost too much to fix. im gogin to buy a battery next week to see if i can get it to start. any suggestions or help wuld be greatly appretiated. and laughing will make me cry lol

post-22549-1151464465.jpg

Link to comment
https://www.sau.com.au/forums/topic/124091-car-broke-dont-know-whats-wrong/
Share on other sites

sounds like it may either be a dead alternator, or the associated wiring.

the burning could be the power cable or the alterntor it self.

when the alternator dies, your car will run till the battery goes flat, in which time all electrical accessories start doign funny things.

get it proffesionally checked out.

steve

i'm pleased to tell you that from what you've posted i'm 90% sure it's just a dead alternator. the other 10% is either faulty battery, or faulty wiring from your stero install constantly putting too much load on the alt/battery.

before running out to buy a new batter see if you can get your old one charged. then put it back in. check the voltage, now start the car and check the voltage. if the voltage goes down with the car running then it's the alt. if you are at all handy save yourself the tow job and pull out the alternator. then take it to an auto electrician for a rebuild. should be under $200 just depends what's needed. then re-fit and your away.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...