Jump to content
SAU Community

Recommended Posts

Stormy. You get what you pay for.

I paid over 30 for my car imported from japan myself. But this was years ago when they were very new. Do I feel ripped off? no way. all the skylines I see all around the place are all banged up. in shit condition.

I would not buy an r33 for 11-13k. My friend just bought an immaculate condition r32 for 14k. now that's something I wouild buy.

If I was to buy an r33 today, i'd be looking to spend at least 20. but hey, that's just me. I like cars that look like they're brand spanking new inside, outside, engine bay, undercarriage. Not a single door dent. No swirlies in the paint.

Let me give you an example. I have another friend. bought an auto r33 gtst for 11k. He thought that he was really smart. This is how the story played out:

The paint was looking pretty tired. so he got a respray - 3k. total is now 14k.

The engine blew after 3 months. 5k rebuild - he did all the work himself. now totals 19k.

manual conversion 1k (parts were purchased really cheap) now totals 20k.

now, at the end of the day, he still has a pos 93 car. The chassis and all the components have done almost 200000ks. The suspensions are all worn. The bushes are all worn. The diff open wheels. steering rack has play.

Fixing all this stuff would probably push the price over 25k, and it'll still be a 93 model.

You could pick up a nice sII for around 20k. I know which one i'd take, and i'm sure there are others who would agree with me

Dead stock R33 GTST ~1994 model in auto should be around $13K/14k

Dead stock R33 GTST ~1994 model in 5spd should be around $14k/15k

Thats what I think but the problem is these cars often have an air filter / rims/ exhaust + more... So people asking a few more $$$ ontop is normal.

+ you gotta remember most of the guys/girls selling these cars would have paid around $25k for them around 5 years ago.. And now that so many Skylines are on our roads and price has came down big time these guys/girls are a little bitter about selling the car for $13/$14k

And now that so many Skylines are on our roads and price has came down big time these guys/girls are a little bitter about selling the car for $13/$14k

Hit the nail on the head :)

I bought mine almost 4 years ago, back when there was only a handful in Perth :nyaanyaa: And the only people that owned them were true enthusiasts!

Now it seems every 18yo can get a 15k loan, grab a '93 skyline, drive without insurance, and write them off :laugh:

Sidenote: My insurance premium has gone UP recently, despite being an extra year older (still under 25) and the car dropping 7k of insured value.

Yep!.........more sour and bitter than a lemon and beer :D

the car is worth as much as someone is willing to pay...simple.

hit the nail on the head. When i sold my car, which had between 15 and 20k in mods, i could only get $20k for it. Right now with the price of fuel, insurance etc i reckon its a buyers market and not a sellers market.

the car is worth as much as someone is willing to pay...simple.

bit unfair for those who have spent mortgages on modifying :D like the wine red one i see in this thread. if i was only willing to pay 15k and saw that for sale i wouldnt call him (out of respect), cos thats atleast worth 30k or whatever the owner is willing to let it go for.

on the other hand, the market value of a r33 gts-t(series 1) dealer trade is $8000,even if you try convincing them u got titanium conrods. rip off as usual but the only way you can sell your car in a day. anyway theres another thread talking about GTR33s selling for 27,000 so i guess the gts owners are phucked!!! just write off the car and collect insurance or strip and sell for parts. will get u more than 14k. just takes too long

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...