Jump to content
SAU Community

Recommended Posts

I recieved a pm this morning (from a user i will not name) claiming to know one of my mates. He then told me a bullsh1t story about a clutch failure, and the fact Jim Berry has dudded him over it. This story could not be further from the truth...not only does Glen not know this tool, Glen has nothing but praise for Jim and the way he handled the situation, getting his car repaired and building him a custom twin plate to get him back on the road. a transcript of the crap is below...

Hi mate,

RE the jim berry clutc, I know a guy who is in the middel of a law suit with jim berry as one of him top line clutch's let go and sent shrapnel through the floor. The materials were tested and found to be faulty but jim berry refused to pay up.

Anyway I have gone for the O S Gikon (think thats the spelling/pronunciation) unit. The gearbox you have sounds like the go but am wondering why you are selling it if you are still activley racing? Also would like to know if you will go any lower on the price?

What a load of SHIT...do you know this guy do you??? the guy in question happens to be one of my good mates. The pressure plate was faulty from manufacture and nothing to do with Jim Berry. Jim's insurance arranged for the car to be repaired (even when the [insert brand name] pressure plate was found to have been cracked from manufacture) and made the process of the car being repaired a simple and painless task. Jim even custom built him a twin plate which is currently in the car and ran a 10.8 at the track last week.If you know this guy so well who is he??? Whats his name?? I think you should stop listening the rumour mill and repeating this bullsh1t as your own experience.

I hate lying f**ks and put them in the same boat as theives.

was willing to help you but not anymore

f**k off idiot...never pm me again

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/126426-jim-berry-clutches/
Share on other sites

I recieved a pm this morning (from a user i will not name) claiming to know one of my mates. He then told me a bullsh1t story about a clutch failure, and the fact Jim Berry has dudded him over it. This story could not be further from the truth...not only does Glen not know this tool, Glen has nothing but praise for Jim and the way he handled the situation, getting his car repaired and building him a custom twin plate to get him back on the road. a transcript of the crap is below...

Hi mate,

RE the jim berry clutc, I know a guy who is in the middel of a law suit with jim berry as one of him top line clutch's let go and sent shrapnel through the floor. The materials were tested and found to be faulty but jim berry refused to pay up.

Anyway I have gone for the O S Gikon (think thats the spelling/pronunciation) unit. The gearbox you have sounds like the go but am wondering why you are selling it if you are still activley racing? Also would like to know if you will go any lower on the price?

What a load of SHIT...do you know this guy do you??? the guy in question happens to be one of my good mates. The pressure plate was faulty from manufacture and nothing to do with Jim Berry. Jim's insurance arranged for the car to be repaired (even when the [insert brand name] pressure plate was found to have been cracked from manufacture) and made the process of the car being repaired a simple and painless task. Jim even custom built him a twin plate which is currently in the car and ran a 10.8 at the track last week.If you know this guy so well who is he??? Whats his name?? I think you should stop listening the rumour mill and repeating this bullsh1t as your

GDAY MATE

HOWS THE FISH FOOD DAVE

Paul if you come on here and have a dig we all love it but we need more info so we can all work out who these said parties are so we can join in the ridicule. Mate Fell for you not baggin you. Its good to vent it sometimes, and yes this person sounds like a tool.

Cheers,

Dan

Paul if you come on here and have a dig we all love it but we need more info so we can all work out who these said parties are so we can join in the ridicule. Mate Fell for you not baggin you. Its good to vent it sometimes, and yes this person sounds like a tool.

Cheers,

Dan

If i didn't know the sort of person Jim was i probably wouldn't have felt so pissed off.....But Jim berry is one of the nice guys of the industry and doesn't need this c0ck spreading a chinese whisper he's heard along the grapevine (even tried to give the story credibility by saying he new the guy). Im not willing to name him as he may have a chance to admit he's a bullsh1tter and apoligise to Jim.....he's got 48hrs. Glen (GTR27L) would also like to know how he knows this wanker!!

I think i know the person you are talking about.

The story I heard from the horses mouth is that after the massive crater it created in the road it smashed through the floor as well.. Quite a mess.

I heard that the workshop is fixing everything and that there are no problems at all.

Even after all this Glen still recommended i get one of these clutch's because they are one of the best you can buy... (maybe when i can afford it lol)

If i didn't know the sort of person Jim was i probably wouldn't have felt so pissed off.....But Jim berry is one of the nice guys of the industry and doesn't need this c0ck spreading a chinese whisper he's heard along the grapevine (even tried to give the story credibility by saying he new the guy). Im not willing to name him as he may have a chance to admit he's a bullsh1tter and apoligise to Jim.....he's got 48hrs. Glen (GTR27L) would also like to know how he knows this wanker!!
Edited by Guilt-Toy

not sure why this needs to be pubically aired, but it's your choice paul. all i'll remember from this thread was that some poor bastard had a piece of clutch or flywheel pierce his floor which would have to be one of the scariest things that could happen to someone in a car. I hope he is ok.

edit: I should add personally i would think it's better for you and Jim Berry if this thread went away, but it's up to you mate.

not sure why this needs to be pubically aired, but it's your choice paul. all i'll remember from this thread was that some poor bastard had a piece of clutch or flywheel pierce his floor which would have to be one of the scariest things that could happen to someone in a car. I hope he is ok.

edit: I should add personally i would think it's better for you and Jim Berry if this thread went away, but it's up to you mate.

Ive got nothin to hide Richard...and either has Jim.....Unfortunately during the manufacturing process the defective pressure plate was not detected by normal quality control. Dont mean to scare people but this brand is a widely used pressure plate thats used in probably 25% of all GTR/GTS-t clutch upgrades.

The reason why its been publicly aired is to quell the bullsh1t and expose the truth...you got a problem with that?

i didn't say i had a problem with it. i was just trying to give you some advice, and i never suggested you or jim had anything to hide. jeezuz is it just me or is everyone out to pick a fight these days?

i didn't say i had a problem with it. i was just trying to give you some advice, and i never suggested you or jim had anything to hide. jeezuz is it just me or is everyone out to pick a fight these days?

Not picking a fight....you had your opinion....i had mine. Just explaining the reason for the thread..thats all.

she's cool

i didn't say i had a problem with it. i was just trying to give you some advice, and i never suggested you or jim had anything to hide. jeezuz is it just me or is everyone out to pick a fight these days?

What did you just fcuking say, carnt? :wave: :wave: :O

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...