Jump to content
SAU Community

Recommended Posts

gday guys

looking to splash out a bit of cash on some toolage..of the automotive variety

basically after a set of those spanners that are open ended one end, and ring the other end with wratchet inside the ring

repco have set for $199. metric, with from memory, sizes 10,12,14,15,17,19

anyway, was just curious bout anyone's recommendations, or who is a good shop to buy tools from

cheers, mark

Link to comment
https://www.sau.com.au/forums/topic/126974-anyone-recommend-tools/
Share on other sites

snap on make very good tools. I used to have a set, but they were stolen from my shed. grrrrrrr.

i've actually got a couple of the repco spanners. I tell you what, I cannot fault them. They are very good tools for their price. The do the same thing as my snap ons did.

The most immprotant thing I have found when looking at tools is to bring a selection of bolts of various sizes and see how tight the spanner fits onto the bolt.

Crap spanners seem to slip a lot. I was trying to install a dump into a friend's car and was using his spanners. they were shit. didn't fit onto the bolt properly.

If you like the repco ones, go have a look at supercheap auto. I personally wouldn't use any of their jacks, electrical equipment, nothing. all that stuff is a joke. it's always recalled. but funnily enough, their spanners are pretty good. not the normal ones. they're called superworks gold. they come with a lifetime warranty. you break it, you get a new one.

I have a set of the superworks gold now. very good tools. it has the needed sizes in metric and imperial. comes with ratchet and sockets too.

My particular set only has a selection of the needed sizes. $179

Honestly, get down to supercrap auto and have look. BUT DO NOT BE TEMPTED TO BUY ANYTHING ELSE. It will either blow up. poke your eye out. chop your hand off. or just not work. I bought a trolley jack, and basically, it exploded and dropped the car.

snap on make very good tools. I used to have a set, but they were stolen from my shed. grrrrrrr

they make the best as far as many mechanics are concerned ... but do you want to pay the price of them.... theu do come with a lifetime warranty ... but you certainly do pay for it...

when i was in in the trade i bought snap on, king crome and sidchrome spanners and ratchets

Edited by akeenan

i still have most of my Snap-on tools from apprentice days and my Uncle had a Van (didnt help on price). Awsome tools but the cost Sheesh!! More better suited as a Tax dodge for business...

Anyway my mate started buying kingcrome and i am really impressed with there stuff as they seem to steal most of the good ideas from the big boys ...

Individual Tools shops are everywhere ! Ask a tradesman in your Area.

Snap on isn't the only one that supply a lifteim warranty.

Sidchrome or kingchrome - can't remember which one.

repco

superworks gold.

BTW, I can't remember which one of sidchrome or kingchrome is the good one. one of them is shit. I think kingchrome is the shit one?

I can't remember this other brand. I've got some oe their tools. They are also very good.

Edited by 97r33gtst-typeM

I would go with the kinchrome tools. Seems to be best bang for your buck in my opinion. You can get them from Bunnings etc.

Really good quality and prices are very reasonable.

Also do a google for transcript direct as thats where I got alot of stuff recently.

first up, forget snap-on. their prices have gotten a lot cheaper and so has their quality. a lot of their tools are no longer made in USA.

if you want good, check out KC or stahle wille. kingchrome is pretty average. fatz tool is no good, it's broken all the time and leaks a bit.

if there's one thing i know... it's tools and you are a fine tool.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...