Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

What about VL turbo's? Are they illegal to drive?

I dare say most coppers don't really take much notice/know. Where I am anyways. There are millions of P platers driving around R33 GTST's. I have seen plenty in Melbourne also. Probably be a bit of bad luck to actually get done for it. If you have any stories, please post them :rofl:

What about VL turbo's? Are they illegal to drive?

Work it out your allowed 125kw per tonne of car. and it goes of factory figures.

Weather or not you get done for it...who knows what it depends on.....cops descretion? I have a friend who has been pulled over an uncountable number of times in his TT soarer and has been done for just about everything in the book except driving a high powered vehicle...

and with the new laws coming in soon about p platers spending a total of 4 yrs on p's n making it like NSW, i dont think many cops will let the p platers off with as much stuff as they have done in the past.

From what i have gathered the power to weight ratio will no longer exist for the p platers and will be a strict case or no V8's or turbo's of any state.

I reckon about one in three R33 turbo's I see are on P plates, so obviously the police don't take TOO much notice.

I think they more target black listed cars/the more powerful ones 300Kw HSV's etc. I would have no reservations whatsoever driving a 33GTST or a soarer etc. but I am a little more cautious when I drive my GTR......still as I said before I think it come down to the discretion of the cop on the day.

Im not sure if they would still stand or not. We will have to wait and see what the answer to that will be.

I had 1 yr left when i first got my R33. I only got pulled up once and they never looked under my bonnet, asked me if it was turbo, nothing. But i would say it all depends what you are doing when you get pulled up,what area you are in and i hate to say this but in some cirumstances what sex you are and what the cop is like.

Guest IH8VEE8S

i thought it was 122kw/tonne :rofl:

man seriously, if you want the car, just get it, i've been pulled over while driving my cousin's old 300+kw@wheels vy hsv and the officer didn't even ask about the car. there are plenty of p-platers who drive r33 gtst's and i know there are a few here aswell. a guy at work has had his r33 gtst since he was 18, he's 22 now and NEVER been hassled about it, although he has been pulled over many times.

I have an r33 gtst and got done for driving a "high powered vehicle" a few weeks back. I was cruising along the freeway when i got pulled over. Been pulled over before but just for a random breath test. Its the TMU you have to look out for. They even looked under the hood. The officer told me that i can still drive my car but run the risk of getting another fine.

I have an r33 gtst and got done for driving a "high powered vehicle" a few weeks back. I was cruising along the freeway when i got pulled over. Been pulled over before but just for a random breath test. Its the TMU you have to look out for. They even looked under the hood. The officer told me that i can still drive my car but run the risk of getting another fine.

What was the fine? and did u lose ne points?

I can deal with a fine every now and then but Points!!...Outrageous!!

and with the new laws coming in soon about p platers spending a total of 4 yrs on p's n making it like NSW, i dont think many cops will let the p platers off with as much stuff as they have done in the past.

From what i have gathered the power to weight ratio will no longer exist for the p platers and will be a strict case or no V8's or turbo's of any state.

that law only affects new p platers, not ones who are already on P's jax.

What was the fine? and did u lose ne points?

I can deal with a fine every now and then but Points!!...Outrageous!!

if you read legislation it IS supposed to incur points and a fine, however every copper knows the offence as a "breach of lisence conditions" whic only falls as a $110 fine and no demerit points....

take a risk... i did and the risk failed on me... however other are luckier

if you speed will you get caught? its the same answer... most of the time, no... but eventually... well i'll let you be the judge of that lol

-Ruffels

my rego sticker says my s2 r33 weighs 1600kg right on the mark for a p plater to drive. only found this out as my brother got done in his s1 r33 for power to weight 1450kg. it doesnt apply to me as i'm 25 but have a look around you might get lucky.

finally getting my car back this week after 6 months off the road YAY! :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...