Jump to content
SAU Community

Recommended Posts

The latest Wheels gives the new Mazda 3 MPS such a glowing review, it has convinced me that I have to get one. Some quick quotes:

"From 80-120km/h in third, it can sprint faster than a Porsche 911 Carrera, HSV GTO, Aston Martin V8 Vantage, Falcon XR6 Turbo and an Impreza WRX"

"Exiting 35km/h corners (in third gear, mind you), the MPS will lay two extrovert black lines straight up the road, and yet does so with surprisingly little torque steer"

"At 60km/h with three people on board, the MPS was breaking into wheelspin in fourth gear as max boost arrived"

Sounds like an absolute riot to me! Perhaps not as sophisticated as the delicate balance between slip angle and wheel spin during a perfectly executed four-wheel drift as you might get in a more rounded rear-drive car (say, a skyline), but hey, that's not really what you buy a 190kw front wheel drive hatch back for is it?

Link to comment
https://www.sau.com.au/forums/topic/128073-mazda-3-mps/
Share on other sites

Would be an awesome little daily driver, very cool for what it is for sure.

Weird. It's as fast as an RX8, obviously not around a track, but in a straight line. From roll on it sounds very impressive. Plenty of mid range meat by the sounds of it.

Link to comment
https://www.sau.com.au/forums/topic/128073-mazda-3-mps/#findComment-2367387
Share on other sites

Mazda3 MPS would have too much torque steer and this Drive article seems to think so too:

http://drive.com.au/Editorial/ArticleDetai...articleID=18339

From the article:

The engine has too much power and torque for a front-drive layout; it then uses electronics in a vain, inept attempt to cover up the problem. We were happy to park it.
Link to comment
https://www.sau.com.au/forums/topic/128073-mazda-3-mps/#findComment-2367469
Share on other sites

Mazda3 MPS would have too much torque steer and this Drive article seems to think so too:

http://drive.com.au/Editorial/ArticleDetai...articleID=18339

From the article:

that's the most uneducated and idiotic thing ive heard

Link to comment
https://www.sau.com.au/forums/topic/128073-mazda-3-mps/#findComment-2367504
Share on other sites

My dad & I took it out for a test drive at the Penrith Mazda along Mulgoa road

The salesman didn't let us drive it without him & made sure we behaved ourselves, although we did take it on the m4 :nyaanyaa: .

acceleration is very linear & I didn't notice any boost spiking (turbo cars these days :D ) although honestly we didn't have much of a chance to put it through it's paces.

same engine as the mps mazda6

it's still a fwd but it's got some Dynamic Stability Control something or other

cons: I hate the hatch, would've been much nicer as a sedan imo

---------------------------------------------------------------------------

Also test drove the xr5 focus, not bad although I wouldn't pay 40k+ for it

rather spend the extra dough for an mps3

post-29425-1154189447.jpgpost-29425-1154189500.jpg

Link to comment
https://www.sau.com.au/forums/topic/128073-mazda-3-mps/#findComment-2367523
Share on other sites

thats why people have done engine swaps with the rx8 and put the rx7 series 6+ engines in it - 13b i think it is.

It's the right car for Mazda to make now, bring the rotary to the masses and make money. But for me it is too slow. The FD was a failure in the sense that it was not profitable for Mazda in the US, their biggest market. The RX8 is fixing that and fingers crossed we will see a car as good as the FD again (except maybe a little less tempremental!).

Link to comment
https://www.sau.com.au/forums/topic/128073-mazda-3-mps/#findComment-2367760
Share on other sites

its 4wd isnt it?

No, it's front wheel drive.

The RX8 is fixing that and fingers crossed we will see a car as good as the FD again (except maybe a little less tempremental!).

Less tempremental reliability then yes. :D

But it's the perfect car when it comes to the mixture of chassis, handling bits and performance.

Link to comment
https://www.sau.com.au/forums/topic/128073-mazda-3-mps/#findComment-2367764
Share on other sites

like i said on another thread, imagine the potential in this little thing has

if it had around 250kw it would be an absolute death trap!!

how heavy is it?

Heavy for a hatch of 10 years ago.

Normal for a hatch released since 2000.

Around 1400kg.

Link to comment
https://www.sau.com.au/forums/topic/128073-mazda-3-mps/#findComment-2369011
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...