Jump to content
SAU Community

Recommended Posts

Well done :D They mentioned the owner was from Australia too... good on them.

Not really into Kei's but with those 'bargain mods' how much power did it make?

its making 80ps at 0.9bar boost.end of next month ill be fitting a bigger turbo which will give me around 100ps at 0.9bar.tossing up wether to get forged pistons too so i can run around 1.4 bar boost.at the moment its got massive midrange torque and great throttle response,the bigger turbo will shift all the power to the top end.4500ish to 8000rpm. The mechanic did a really good job tuning the E-manage.very smooth and very good response.a lot of the other kei tuners just go for maximum power but the response is very bad.

Rezz - i think you might have misread the articles title.Its "batsugun" not bargain

Edited by Hungryhippo
its making 80ps at 0.9bar boost.end of next month ill be fitting a bigger turbo which will give me around 100ps at 0.9bar.tossing up wether to get forged pistons too so i can run around 1.4 bar boost.at the moment its got massive midrange torque and great throttle response,the bigger turbo will shift all the power to the top end.4500ish to 8000rpm. The mechanic did a really good job tuning the E-manage.very smooth and very good response.a lot of the other kei tuners just go for maximum power but the response is very bad.

Rezz - i think you might have misread the articles title.Its "batsugun" not bargain

lol yeah misread it... :happy: stupid mistake.

I'm wondering what that Suzuki Cappucino was running to hit 242km/h (can't remember who modified it)? I've heard someone getting 200+hp from an F6A... doesn't sound like much but I can only imagine what it would be like to drive.

the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc :happy:

most of the race prepped keis here get around 150-200ps from either the f6a or k6a.

Edited by Hungryhippo
the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc :yes:

If he can get 300ps thats gotta be up there as one of the most powerful F6A's yeah? Gotta remind people reading this thread that 760cc refers to engine capacity not injector size :happy:

thats what hes shooting for.hes using the old k6a.the newer one like the one in my car with individual coil packs doesnt seem as good for insane power levels.its better suited for street use,much wider spread of power but not so much topend. 250 is the absolute max he can get from 660cc so hes upping it to 760cc

Edited by Hungryhippo

its a year old.shakken in 2 years.the e-manage will be ok.one of his customers even got his car passed without a cat.they really dont care about keis here when it comes to regulations.it only costs 30 000yen for shakken but from what ive heard its around 100 000 yen for a normal car.i also dont have a cat but fingers crossed i wont have to put the cat back on.

Yeah shaken for my HCR32 was around 100,000yen. Ever driven a Honda Z? I know they look more like a mini 4WD, but Honda factory turbo does have a ring to it... I've never seen any modded examples around, just the odd one in traffic.

Like I said I've never really been into Kei's, even after 5+ years in Japan never really bothered to check them out... although I did borrow a friends AT Suzuki Wagon R RR (with BOV) for a couple of days lol... but this has been pretty interesting. Thanks for the insight :cheers:

nah.only driven suzuki kei cars.alto and cappuccino.oh man, u drove a wagonr rr auto?????ouch.

ive always liked little cars.and with the price of petrol now im kinda glad ive got a kei.even bouncing off the rev limiter in the mountains for a few hours i get around 11 litres/100kms.

  • 4 weeks later...
  • 4 weeks later...
the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc smile.gif

most of the race prepped keis here get around 150-200ps from either the f6a or k6a.

u no where i can get more info on his car :D ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...