Jump to content
SAU Community

My Car In A Jap Performance Mag :)


Hungryhippo
 Share

Recommended Posts

Its not a skyline but I'm sure someone here will be interested in this.The mechanic I go to called me and said that K-Car Special mag wanted to do a feature on one of his customers cars that he'd fitted and tuned an E-Manage on.

vfsh1195rc3.jpg

Link to comment
Share on other sites

Well done :) They mentioned the owner was from Australia too... good on them.

Not really into Kei's but with those 'bargain mods' how much power did it make?

Link to comment
Share on other sites

Well done :D They mentioned the owner was from Australia too... good on them.

Not really into Kei's but with those 'bargain mods' how much power did it make?

its making 80ps at 0.9bar boost.end of next month ill be fitting a bigger turbo which will give me around 100ps at 0.9bar.tossing up wether to get forged pistons too so i can run around 1.4 bar boost.at the moment its got massive midrange torque and great throttle response,the bigger turbo will shift all the power to the top end.4500ish to 8000rpm. The mechanic did a really good job tuning the E-manage.very smooth and very good response.a lot of the other kei tuners just go for maximum power but the response is very bad.

Rezz - i think you might have misread the articles title.Its "batsugun" not bargain

Edited by Hungryhippo
Link to comment
Share on other sites

its making 80ps at 0.9bar boost.end of next month ill be fitting a bigger turbo which will give me around 100ps at 0.9bar.tossing up wether to get forged pistons too so i can run around 1.4 bar boost.at the moment its got massive midrange torque and great throttle response,the bigger turbo will shift all the power to the top end.4500ish to 8000rpm. The mechanic did a really good job tuning the E-manage.very smooth and very good response.a lot of the other kei tuners just go for maximum power but the response is very bad.

Rezz - i think you might have misread the articles title.Its "batsugun" not bargain

lol yeah misread it... :happy: stupid mistake.

I'm wondering what that Suzuki Cappucino was running to hit 242km/h (can't remember who modified it)? I've heard someone getting 200+hp from an F6A... doesn't sound like much but I can only imagine what it would be like to drive.

Link to comment
Share on other sites

the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc :happy:

most of the race prepped keis here get around 150-200ps from either the f6a or k6a.

Edited by Hungryhippo
Link to comment
Share on other sites

the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc :yes:

If he can get 300ps thats gotta be up there as one of the most powerful F6A's yeah? Gotta remind people reading this thread that 760cc refers to engine capacity not injector size :happy:

Link to comment
Share on other sites

thats what hes shooting for.hes using the old k6a.the newer one like the one in my car with individual coil packs doesnt seem as good for insane power levels.its better suited for street use,much wider spread of power but not so much topend. 250 is the absolute max he can get from 660cc so hes upping it to 760cc

Edited by Hungryhippo
Link to comment
Share on other sites

Your car still looks fairly new, when is it up for shaken? Will any of those mods (particularly the e-manage) have to come off to get passed?

Link to comment
Share on other sites

its a year old.shakken in 2 years.the e-manage will be ok.one of his customers even got his car passed without a cat.they really dont care about keis here when it comes to regulations.it only costs 30 000yen for shakken but from what ive heard its around 100 000 yen for a normal car.i also dont have a cat but fingers crossed i wont have to put the cat back on.

Link to comment
Share on other sites

Yeah shaken for my HCR32 was around 100,000yen. Ever driven a Honda Z? I know they look more like a mini 4WD, but Honda factory turbo does have a ring to it... I've never seen any modded examples around, just the odd one in traffic.

Like I said I've never really been into Kei's, even after 5+ years in Japan never really bothered to check them out... although I did borrow a friends AT Suzuki Wagon R RR (with BOV) for a couple of days lol... but this has been pretty interesting. Thanks for the insight :cheers:

Link to comment
Share on other sites

nah.only driven suzuki kei cars.alto and cappuccino.oh man, u drove a wagonr rr auto?????ouch.

ive always liked little cars.and with the price of petrol now im kinda glad ive got a kei.even bouncing off the rev limiter in the mountains for a few hours i get around 11 litres/100kms.

Link to comment
Share on other sites

  • 4 weeks later...
  • 4 weeks later...
the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc smile.gif

most of the race prepped keis here get around 150-200ps from either the f6a or k6a.

u no where i can get more info on his car :D ?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • G30-770. So long as you're talking engine horsepower, and not some bullshit wheel/axle/mystery horsepower.
    • It's a lottery, no one is going to be able to predict how much HP YOUR engine is going to handle as history has a huge part to play.    As examples though. I have one rb26 on 630rwhp, running 16 years now at that level, track use, only a couple of times a year.  Another 790rwhp, about 2 years now, driven every weekend.    If i was to give you a "safe" number I would say 450rwhp on 98 and 550-600 on e85.  Seen plenty of motors pop with less though too      
    • Fair play on the 120k, sorry just live in nanny Aus.  High rpm on cruise would kill me too.    On the gears, its not just first, so beside the fact I really enjoy that nice punch you get when you accel in first. 2nd is all messed up in the gearsets too. Most people I know with gearsets(even sequentials) have to drop into 1st for tarmac rally slower corners as second gear is too low in rpm, its painful. Translate to the street, I am using a 2.3 gear out of a low speed turn, gearset you got a 1.7 second. I can tell you now between my two cars which one is a LOT more fun.    On a track its a different story, once the car is moving the gearset ratios are supreme, 1st gets you going on a big rpm launch, then 2nd is no issue for the corner speed on most tracks.    Yer the price sucks  , old enough to remember these selling for $1500usd here in Aus. 
    • Will mainly be steering the car as tracking it in China would reduce its value a lot and mines a near mint condition v spec 2. Just weighing out the options for the next improvement. Thanks 
    • Thanks for the info. With the 2.8L stroker kit what would be the best single turbo setup for around 700-750 drivable horsepower? As I think after that it’s going to be very aggressive power delivery. 
×
×
  • Create New...