Jump to content
SAU Community

Recommended Posts

hey all i was just wanting to know about

1990 NISSAN SKYLINE GXE

im thinking about it for a first car money is very tight at the moment so needing something cheap and reliable, so i thought i would ask here if they are good, reliable, strong, cheap to fix, low on fuel, cheap rego, cheap insurance, all round good cars?

here is a few pics of the ones i have been looking at

post-30287-1154347369.jpg

post-30287-1154347388.jpg

post-30287-1154347432.jpg

post-30287-1154347455.jpg

post-30287-1154347493.jpg

post-30287-1154347509.jpg

Link to comment
https://www.sau.com.au/forums/topic/128331-first-car/
Share on other sites

There is no doubt, it is a good car. You need to do some budgeting though. When i got my first car, it was only a four cylinder. This saved me a lot on petrol. Not saying that the skyline chews through fuel, (nothing like a 5.7l V8) but I did feel the difference of six cylinders when I got my R33. I think its worth paying a little extra for, but the final decision is up to you. I'd say its a good first car. Good luck with the car hunt, let us know how you go. :happy:

Link to comment
https://www.sau.com.au/forums/topic/128331-first-car/#findComment-2371825
Share on other sites

Yes the R31 is a nice reliable first car, one of my mates got one about 6 years ago when we we're still in school - looks exactly the same as the second on in those pics. He still drives it today. I've been thinking of getting one myself lately and getting an LPG conversion so I can run it as a daily.

Just take your time and wait until you find the right one :happy:

Link to comment
https://www.sau.com.au/forums/topic/128331-first-car/#findComment-2371852
Share on other sites

better than what i had, but in terms of fuel costs, nothing beats my little "dune buggy" aka 1982 honda civic. If I recall correctly in 35 ltrs i had achieved around 500klms (which is around 7ltrs per 100). It would probably have been better when it was aroudn 10 years old, but hey cant complain.

The only down side apart from the space and all that is the power. The 1.3 took ages to get to 100km/h - so when I got the r33, it took me a few days to get used to the rapid response of the throttle....

If you want to get a good 80's skyline, make sure that the car has been regularly serviced - you dont want it eating up fuel - not now anyway....

Edited by emsta2003
Link to comment
https://www.sau.com.au/forums/topic/128331-first-car/#findComment-2386255
Share on other sites

r31 probably not a bad choice... Just being an old car get it checked out, find out what needs doing to it, and how much its going to cost before handing over any money. The fuel cost wont kill you, fixing stuff will.

A corolla wouldnt be bad either. Cant kill them. Same thing tho hey. Old car need to know what needs doing.

Link to comment
https://www.sau.com.au/forums/topic/128331-first-car/#findComment-2386265
Share on other sites

Yeah great car, i previosly had a R31 silloutte burgandy over silver, got it off parents who owned it since new, had 500,000 k's on clock and still was running awsome, not a problem exept power steering pump gave up, had some mods, extractors, 2.5 inch custom exhaust twin pipes and power and torque chips in ecu, got bout 400k's a tank, you cant go wrong with the r31 i think, they can take a beating, we looked after that car well it looked after us great choice and you will be very happy with it and if need parts the gxe and all that are good with finding parts unlike the silloutte and gts. But you got a great car there mate

Link to comment
https://www.sau.com.au/forums/topic/128331-first-car/#findComment-2393387
Share on other sites

I had an r31 GXE when I was about 20 for my second car.. did me well..

back then they were in the daggy basket that nobody cared about. Now it seems they're a popular first car.

I had a VL commodore, dont buy one of those. They share the same engine and trans as the R31. Awesomely reliable! Although the commodore rusted out and had a terrible interior. Things to check are power steering racks ( i think , make sure no leaks) and if its an auto, check the overdrive works and engauges gears correctly.

Link to comment
https://www.sau.com.au/forums/topic/128331-first-car/#findComment-2399910
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...