Jump to content
SAU Community

Recommended Posts

Here you go guys

Oh, and Nismo Boy, how about you look at how everyone else has provided their VIN and supply me with the correct format - I can't FAST the numbers you have provided. Engine numbers and model numbers are no good.

post-669-1250082022_thumb.jpg

post-669-1250082035_thumb.jpg

Hey guys - First post here! Sorry to not give a proper introduction but this request is very urgent :)

Looking at a 180SX at the moment - bit of an epic saga that started in June.

VIN: 6U9000RPS13324593

Engine Number: SR20848988A

Thanks a bunch in advance~ :mrt:

*Corrected VIN number

Edited by Rundle32
Here you go guys

Oh, and Nismo Boy, how about you look at how everyone else has provided their VIN and supply me with the correct format - I can't FAST the numbers you have provided. Engine numbers and model numbers are no good.

Why i posted the Aussie VIN is past my own common sense, sorry. Here is the correct one I hope.

HCR32-284478

More important than the photo would be looking at the factory build plate rather than the Australian compliance plate. Remember, the FAST system is a Nissan product and has absolutely nothing to do with the local bureaucracy. But in your case, you might want to look your car up on the RAWS site to see what that says too.

The VIN is 6T91MPAAAT1GVT001

I searched through one website and it said it was a blue 33. Which it is. But then it asked to pay so i said pffftttt. Tried searching through other sites and it says that it can't find it.

hey guys i got no idea what happens here but im buyin a r33 gtr not sure if its a vspec could sum1 please help and just anyother general info would be awesome.

BCNR33022988

GGPRQFR33ZDA A AA

the second one is the body num dont know if thats needed, thought id put it neways.

cheers.

The first one is the body number, and the second is the model code. That is the EXACT information that we need in order to look up the car. Others take note!

:D

(But I'm not on a PC with FAST right now, so I can't actually look it up - I'll try to do it later on tonight)

:thumbsup:

you're welcome - but I have no idea how to tell if it is a VSpec or has options - most of the program is in Japanese. Someone else might be able to tell if it is a VSpec from the screenie I posted though?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
×
×
  • Create New...