Jump to content
SAU Community

Recommended Posts

Hi, I've been running a few numbers through fast. I did all the 33 gtr's from1995 to find out how many n1s were made. I'll be running the rest of the 33s soon so we have the whole lot covered.

So there was 46 n1s made in 1995 if anyone was wandering. Will be putting all the info into a spreadsheet over the weekend, so if you have a 95 GTR,I will be able to tell you what number your vspec,GTR or n1 is of the total for the year, colour breakdown aswell. So feel free to message me and I'll tell you what I know.

Ive downloaded the softwear, now im in the schematics looking for parts so I can order

I can see the 'part code' is in the schematics but how do I figure out the 'part number"?

cheers

post-38094-0-23467200-1412418312_thumb.jpg

So double-click the part code you want, and it should go red...

post-38094-0-03170400-1412418317_thumb.jpg

Now click the red book towards the top. This will search for the part number from a sub folder...

post-38094-0-18251700-1412418323_thumb.jpg

Part number is now displayed with part code, description and any alternative part numbers...

Could I get mine please

BCNR33-007663

GGJPRQFR33ZDAGJ

An exact Frame Number could not be found on the system but the closes we got was:

VIN.jpg

Thanks in advance for...

BNR32-311603

And extra thanks for anyone who can read the code for what came on this Nissan with Model# ...

KBNR32RBFS8 ZN

VIN_1.jpg

R32 GTR V-Spec II N1!

Nice :D

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...