Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

I am about to take delivery of a r33 gts-t M spec - it has 19" wheels (not lowered), 3" exhaust, tinted indicator lights

I don't think it is that loud but is there anything with 19" rims or tinted indicator lights that would cause me issues?

Thanks,

Steve

Is it delivery from import (first time australian registration) or delivery from interstate (transfer of rego from another state)

If its first time Aus rego your in for some fun :) Nothing you mentioned will pass and you must take the car back to factory specific. If this is the case i can help you out with the stock orange indicators and stock R33 exhaust, someone should have some stock r33 wheels with decent tread. Leech helped me out with the stock wheels when i had to go through this (Dickson are bastards... took me 3 attempts because of little things but he has sold his skyline and may have sold the wheels already

If its interstate rego you will need smaller rims as stock R33 wheels are 16" and the difference is too large (12mm max?) Best bet is to change exhaust anyway, not worth the stuffing around with going back and forth and organising time off to go there.

Goodluck with it though, im fine to lend you the indicators (are you talking about the side blinkers?) and exhaust if necessary

Edited by Baconer
Is it delivery from import (first time australian registration) or delivery from interstate (transfer of rego from another state)

If its first time Aus rego your in for some fun :) Nothing you mentioned will pass and you must take the car back to factory specific. If this is the case i can help you out with the stock orange indicators and stock R33 exhaust, someone should have some stock r33 wheels with decent tread. Leech helped me out with the stock wheels when i had to go through this (Dickson are bastards... took me 3 attempts because of little things but he has sold his skyline and may have sold the wheels already

If its interstate rego you will need smaller rims as stock R33 wheels are 16" and the difference is too large (12mm max?) Best bet is to change exhaust anyway, not worth the stuffing around with going back and forth and organising time off to go there.

Goodluck with it though, im fine to lend you the indicators (are you talking about the side blinkers?) and exhaust if necessary

Thanks Baconer!

It's changing from NSW to ACT (in fact i am tempted to keep it as NSW and just list my address as my father in laws place on the central coast)...

It has a GTR front bar and it's the indicators in it which are tinted - these may be hard to come by i think (although I just found out a bloke I work with just bought a R33 GTR!!). The side indicators are clear - do you reckon these will be ok?

I was thinking I could get the boys at city exhaust to whiz something up for me if I need to quiet it down any, but from memory it was not too loud when I drove it - The previous owner had it put on and thinks it is ok too...

Thanks again,

Steve

Pretty sure Series 2 R33's came with clear side indicators on the guards, so don't think they should ping you for that.

Nope they had the good old orange suckers. I doubt these would be rejected though as long as they have orange bulbs in them.

Nope they had the good old orange suckers. I doubt these would be rejected though as long as they have orange bulbs in them.

Not sure what colour the bulbs are, but that's easy to fix!!

I guess I will just need to borrow a set of 17" wheels and possibly quiet down the exhaust a little.. Are there any restriction on the cooler? It also has an air filter pod, which is enclosed by a custom shield the guy made...

Also, how much do you know about the gearboxes? this one had some crunching going from 3 -4th I am guessing the synchro is shot? Any thoughts on where to source a second hand box, and where to get it fitted?

Thanks :P

Steve

Ahh, thanks anyway Leech but looks like they are too different! I am trying to find out which front bar I have so I can see where to get replacement indicators.. Other thing I may try is going to Repco and getting something that fits... they're rectangles so I cannot imagine it would be that hard!!

This is the bar http://www.gostrent.com/skyline/sly033.jpg, any idea?

Cheers,

Steve

He's talking about the indicators on the front of the Trust bar he has. I have the same problem, I have no front indicators. So I'm gonna have to figure out how I can fit some on.

yeah sorry guys it is the front indicators not the side ones.. Do rego tend to knock you back on things like that?

Cheers,

Steve

Sorry to get off topic... Steve, was that your 33 today at Telstra? It matched the description perfectly just not sure about the colour. Real mint!

Nah, I was in melbourne this morning and only took it out for a small drive to the shops to pick up my dry cleaning :)

yeah sorry guys it is the front indicators not the side ones.. Do rego tend to knock you back on things like that?

They'd pick you up on it as soon as they made you test your indicators. So yes, you'll need some if you want to get over the pits.

They'd pick you up on it as soon as they made you test your indicators. So yes, you'll need some if you want to get over the pits.

Yeah, thought as much. I guess my two options are:

1. Try to source similar indicators from repco, or

2. Try to remove the tinting from the indicators - any thoughts in whether this would actually work?

Cheers,

Steve

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...