Jump to content
SAU Community

Recommended Posts

  • Replies 422
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You almost had me? You never had me you never had your car... Granny shiftin' not double clutchin' like you should. You're lucky that hundred shot of NOS didn't blow the welds on the intake! You almost had me?

There's Morpowa, no residential houses along that street & pricing should be around the Tilbrooks range.

i would hope to think there cheaper than Tilbrooks and i dont think skylines would be much louder than revvy toyota's but would have to ask shaun what he knows he can get away with

i think on said night we could all put in maybee for pizza pie and cokes wot ever your poison

try and find my extra 20kw that i lost :)

my extra bits are

BP: 101.3 RH: 60 AT:25 IT:39 RR:013 TN:3.454

Steve didn't they say your car was leaning out? Or was that just Seans car? Maybe your fuel pump is on the way out or you need to start using 98 octane.

Interesting the IT temps are consistent.

Didn't feel like 40degree air inside there. yer was warm but not 40.

Was shaun placing the sensor on the pods/inlet snorkle etc I can't say I looked. :)

Yeah I did notice Shaun was placing the sensor in the snorkel.

Still surprised that my IT was 49, heat soak, a hot engine & maybe a bad fan position too is the only explanation I have.

Edited by JazzaR33
Steve didn't they say your car was leaning out? Or was that just Seans car? Maybe your fuel pump is on the way out or you need to start using 98 octane.

yeah my last dyno run when i got 175 it was leaning out but on sat shaun said it was fine :)

i need to book sum time with him i think

From my experience with dyno's its more your rear tyres getting to hot that drops the power/ torque on the second run then heat soak.

If you sit back and think about how much load is placed on your back tyres as there screaming away on a nearly smooth metal drum. also when you add in the fact that shaun straps your cars back and down, in my eyes thats pulling your rear wheels away from the front roller. how are you supposed to get good power to to the dyno with out getting up on top of the front roller for maximum traction?

the only proof i have is i was with a friend at boostworx a couple of months ago and he was missing 56kws from the previous day on a different dyno. i felt the tyres after just one power run and they were slimy, and way to hot to use so we left.

on the other hand hitek dyno straps your car very differently. the further your car goes forward the harder its forced onto the front roller, and you get consistent runs.

the other day i was on there for over an hour and as we made changes the power kept rising.

once i got to final reult we ran it up twice and both runs were within 1 kw of each other. yet the back tyres were still gripping stong and weren't slimy at all.

end result 317kws.

He also uses a laptop for tuning the power fc.

The main reason I got such a major power drop I think you will find is due to the fact I've still only got the little side mount intercooler & mine did put out the highest amount of power out of the 33's with the stockie. Many were actually pulling more power on their second run & they had a lot more at the wheels than me, somehow I don't think 177kw is enough to trouble their dyno & I do have some 265's on the back so pleanty of grip.

Both runs were done simitaneously & when you look at my chart torque was dropping off the whole way through (it jumped up when it boost control went into high mode but started dropping off even quicker thereafter) so by the time the second run was carried out my intake temp at the plenum would have been nice & toasty.

I'm sure if I get a beefy front mount fitted the readings will be much more consistent, not to mention higher.

Edited by JazzaR33
He also uses a laptop for tuning the power fc.

Shaun owns a datalogit. He prefers to use the hc as its faster for him. Using the lappie is personal preference and is no different to using the hc. It just enables us to data log, and change a few other settings when u run out of resolution etc...

he was missing 56kws from the previous day on a different dyno

Its about consistency. Dont go from one dyno to another and expect it to read the same. Shauns dyno is know to read lower than others.

Edited by Bl4cK32
Shaun owns a datalogit. He prefers to use the hc as its faster for him. Using the lappie is personal preference and is no different to using the hc. It just enables us to data log, and change a few other settings when u run out of resolution etc...

Its about consistency. Dont go from one dyno to another and expect it to read the same. Shauns dyno is know to read lower than others.

I was more concerned by the temp of the tyres.

on shauns dyno they were melting, on the other dyno they were fine to touch.

next time you run your car there feel your tyres!

it maybe the reason why his dyno reads low....

If you strap it loose and let the tyres up on the front rollers,

you will get a higher reading:), this trick has been proven many times

in dyno comps before here and interstate. You can apparently also overspeed the dyno by getting it

up on the front roller and let it wheelsping hard on it and get a fudged figure aswell with big power cars

I'm confused, why would you get more traction on the front roller, there is more surface area when you car

is on both rollers! the same reason you tyres get a lot hotter! they are actually touching something!

Edited by S3_Girl

I dunno about you guys but I don't think Shaun's dyno reads low. It seems on the mark to me. But interesting about the tyres being warm. Its an indication that there is excessive friction.. either being strapped down too hard or not enough?

my old mechanic told me u can also run brake on dynos and sum tunning places will wind the brake on for your first pass pretend to much arround with your car then wind it off and instant more KW your happy and they get paid :(

thats the first time i've heard that about the tires, its interesting to know, i think you guys need to try and stop reading into these figures so much. Remember a dyno is only a tuning tool, the track and your MPH is a real test of the power your making and until we get a track we won't really know i guess! Dyno's can vary so much with their power readings just from the tiniest things, its nothing to get caught up on!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...