Jump to content
SAU Community

Recommended Posts

Sydneykid, feel free to PM me your honest opinion :P

I think we would all like to hear it. Whats it like on the street, does it just burst into wheel spin as soon as you get on boost? looks like it would be a handful to drive fast.

Dont get me wrong, i wasnt trying to put a downer on your results mate.. And im all for wheelspin.

My old 180 had 360rwhp and spun in 3rd coming onto boost on some surfaces.... but thought in 4th and with 197rwkw (or any car that spins a lot in 4th for that matter) you might want to look at your setup.

As fun as wheelspin is, nothing feels as awesome when it hooks up and slams you hard into the seat.

ok, the car is a drift car, not s street car, so i was after a fairly sharp torque range in the midrange for responce and the ability to keep the tyres smoking after entering a high speed corner while slowing down for a slow speec hair pin. XSomething a stock Rb20 doesnt do well.

not too fussed about making much more peak power... would rather have reliability and midrange torque then massive peak HP.

cheers

Simon

Dont get me wrong, i wasnt trying to put a downer on your results mate.. And im all for wheelspin.

My old 180 had 360rwhp and spun in 3rd coming onto boost on some surfaces.... but thought in 4th and with 197rwkw (or any car that spins a lot in 4th for that matter) you might want to look at your setup.

As fun as wheelspin is, nothing feels as awesome when it hooks up and slams you hard into the seat.

me = 270rwkw + no loss of traction coming on boost in 2nd/3rd at all running 245 streeters.... then i went to 300+ and only then did it squirm. Gotta control the right foot :(

That was a nice push into the seat.

guess thats the joy of linear power rather than a light-switch.

but a light-switch turbo would be much better suited to drift one would think. But i guess you can argue either way

... whereas with a bb turbo it would be more gradual resulting in less wheelspin.

Thats funny as the cars with big BB turbo that i have been in kick you in the guts and knock your teeth out! Then my turbo for isntance seems a bit duller when it ramps onto boost.

Perhaps mine has been tuned with the fact its rwd and i go to the track in mind??? I dont know, but the supposed hard boosting trust turbo on mine doesnt seem to hit hard...i want to scare myself when it comes onto boost , who cares if its slower :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
    • Yeah the rule of thumb with an LS is 7psi per 1000rpm. That is decidedly not enough at 6800rpm. I mainly looked for the scenarios where knock started to be picked up and it was later in the session when things were hotter, and oil was thinner, and the pressure was lower than it should be. (i.e very horrible). I am hoping with thicker oil (I was running Penrite ten tenths 10-40, the manual specifies 10-30) that does not leak that it's much improved at that time!!! I am using Project Mu Club Racer CR pads. I'm also using the Project Mu 335C fluid. The symptoms imply that it was fluid that boiled, but no bubbles seemed pretty weird to me when I bled it today. I want to try Castrol SRF as it has a much higher wet temp but, well, I have new Project Mu fluid lol... so I should at least use that. The pedal on track was really noticable. It went from basically normal feeling to instantly near-floor. The car did pull up as before, it was just very much nearly at the floor before the brakes engaged. At that point I pretty much decided the day was very done, it did *kinda* come back during that very slow cooldown lap into the pits. Felt perfectly fine driving home.
    • f**king around with the bro
×
×
  • Create New...