Jump to content
SAU Community

Recommended Posts

Well might as well give this a stab.

Since everyone knows the government and its plan for LPG in cars.

Does anyone know places in Sydney to have their car installed with LPG?

And if so prices would be good. Mates rates would be good too >_<

Prices have probably doubled since the government's announcement. :)

Been thinking about this for the Corolla.

What are everyone's ideas?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/130319-lpg-installers-thoughts/
Share on other sites

one of the guys here just got an LPG conversion for a v6 commonwhore. I think it was $4k or something.

What I can't get over is the fact that the LPG technology they convert your car to use was designed back in the 60's.

LPG systems are a joke. why you want to convert a decent EFI car to one with a half arsed carby set-up is beyond me. just to "maybe" save a few bucks and spend your time driving around in a backfiring, hard to start car that smells like fart.

LPG systems are a joke. why you want to convert a decent EFI car to one with a half arsed carby set-up is beyond me. just to "maybe" save a few bucks and spend your time driving around in a backfiring, hard to start car that smells like fart.

big thumbs up!

at least then your lame trdy plate might make a little sense as every time you drive past someone with think the person walking in front of them just filled his nappy.

haha, man i am cruel.

2k of fuel prolly lasts a long time...

hmm

actually, with petrol prices these days and the inevitable increase predicted with the coming months and if you fill up for $80 a tank (bp ultimate) a week it would take roughly 20 weeks to spend that money. that's less than 6 months.

my question though is will converting to lpg decrease a car's performance? ie. skylines in particular (apart from the increased weight of the tank)??

my question though is will converting to lpg decrease a car's performance? ie. skylines in particular (apart from the increased weight of the tank)??

The general rule of thumb is that you lose around 5% power going from petrol to LPG. Not sure if its the same for turbo cars, since most people who do it tend to run NA engines.

If it burns cooler at a higher octane, you can always offset this by running more boost.

Saw an article in some HPI or Zoom mag. I only briefly read it though and can't remember exactly what it said.

But the gist of it went:

There's a workshop in Queensland that's actually developing a proper LPG system.

The owner of the shop has converted his BA xr6 turbo to run on petrol and LPG but with proper injection and engine management (different to the normal, "lets blow lpg down the f**king intake pipe and take a brand new engine and make it run like it was designed in the 60's").

After tuning the car apparently makes more torque down low, and switches to petrol seemlessly up high in the rev range to give better top end, or something.

Freaky. I remember putting gas a couple of old v8's I owned. The peak torque area moved UP about 1000 revs.

Also I don't think unleaded takes you 30% further, LPG is something like 8-10% less efficient without making other changes to the engine, eg ecu and cams.

I thought it actally burned hotter than petrol which was why one of the age old drawbacks of it was burnt out valves, particularly on engines designed to run on leaded fuel without hardened valve seats.

There was a guy on the forums a while ago building up an engine in his line which he was going to run on dedicated LPG. He said they were looking at 10-15% increase in power due to higher octane rating of gas. Sounded like he had done his research, but i dont' know a whole lot about it except that i've seen it on dual fuel systems and it runs like a dog.

However i would be interested if they proved it would run nicely, and save a bit of money (considering LPG is almost 1/3 the price of petrol now)

$80 tank x 20 weeks = $1600

apologies for not being clear with the calculation. the reason i estimated this price is because the money it will cost to fill up a tank will increase over the next 6 months.

anyways, i agree with what shif-tea..

However i would be interested if they proved it would run nicely, and save a bit of money (considering LPG is almost 1/3 the price of petrol now)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...