Jump to content
SAU Community

Recommended Posts

SIKR33

On the internet, as in real life, there are certain rules that people should follow - in this case, they are referred to as 'netiquette'. Here are a couple of links I found by typing 'netiquette' into Google:

http://www.dtcc.edu/cs/rfc1855.html

http://www.albion.com/netiquette/

You will note that typing with caps lock on, apart from being annoying to read, is considered as shouting on the internet, and can also be considered rude in some circumstances.

Noone is suggesting that you're an idiot or anything because you use caps lock - in fact, I think most of us appreciate you taking the time to post up little tidbits of info like that in your top post. It's simply more pleasant to read something that's written in lower case or, preferably, mixed case (proper capitalisation). Please don't bite someone's head off because they have the nerve to offer constructive criticism.

Please, PLEASE, turn your caps lock off. Think of it like the indicator on your car. It isn't absolutely necessary to use it to go places, but it sure as hell makes the trip far more pleasant for those you encounter along the way.

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

Yes, I had a spare five seconds to look up that info. It shows a huge amount of immaturity on your part for attacking people who have a simple request, like pressing ONE KEY on your keyboard. All of 23 posts to your name and already stirring shìt.

570CK, I've read what he has to say and its useless info. As a FYI, I went out to my garage and fondled the hose's going to the solenoid that I'd previously removed. No restrictor. Its a well known GTR tip, not one for the 25t.

Can a mod please, please ban SIKR33. Every post I've read from him has been useless. Every sugestion to him to not use caps has been ignored.

anyone got more info on the location of this restrictor? or some pics?

does it restrict air before it enters the turbo or boosted air after it leaves the turbo? coz if it is after then it will probably up the boost won't it? And for soemone running on 10psi (me!) that could mean turbo danger in the future if you rise again.

I don't think you're dazzling anyone with your intelligence. Ignoring and subsequently attacking people with an incredibly simple request is not a good way to make friends in here.

Anyway, getting back on topic, a restrictor in the wastegate line, particularly after any boost controller, can only slow the passage of pressurised air, thereby causing boost to come on harder and possibly with a small spike. Surely removing it will slow boost response and remove any short spike in the boost curve? So, without some form of EBC or at least a gated bleed valve, the car will feel more sluggish. With an aftermarket controller, you don't want a restriction to affect the function of the controller so in this case, go for it and remove the restrictor.

Guest 570CK
Originally posted by Revhead

I don't think you're dazzling anyone with your intelligence.  Ignoring and subsequently attacking people with an incredibly simple request is not a good way to make friends in here.

Anyway, getting back on topic, a restrictor in the wastegate line, particularly after any boost controller, can only slow the passage of pressurised air, thereby causing boost to come on harder and possibly with a small spike.  Surely removing it will slow boost response and remove any short spike in the boost curve? So, without some form of EBC or at least a gated bleed valve, the car will feel more sluggish.  With an aftermarket controller, you don't want a restriction to affect the function of the controller so in this case, go for it and remove the restrictor.

Yep is does cause the boost to spike

Hey guys, the point that needs to be acknowledged in this discussion is that it only applies to the GTR. For people who think that it does not increase power, your wrong.

Last week I was told by my tuner/mechanic who specialises in GTR's said that he was surprised that I still had the restrictor in, apperantly it's the first thing you do when buying a GTR (remove restrictor), and it DOES NOT harm your engine or turbo.

Anyway I had my car tuned on the dyno and it went from 185 rwkws (stock boost) to 215 rwkws with taking out restrictor and installing adjustable cam gears/dialing in cams. Boost increased to 13.5 psi, but only held 12.7 psi through high revs. However Powewr FC with boost solenoid and hand controller are going in in the next few weeks, to increase boost to 1.1 bar (apprx 16psi) and lean out the fuel (was running 10.8 a/f ratio). Power should increase to 240-250 rwkws.

Therefore by taking out restrictor it increased boost from approx. 9 psi to 13 psi. Definetly a power increase there.

Just thought I'd shine some light into the discussion.

P.S Other mods incl full exhaust (3'' high flow cat), Apexi pod filter kit, oil catch can.

guys if you dont believe me ask the guys at tilbrooks auto and dyno theyre the guys who told me to remove the factory retstrictor and seriously i have had no problems here the car goes like a shower of shit AND YES i am a licenced aircraft maintenance engineer i did 6 1/2 years in the RAAF in ardu

AIRCRAFT research and DEVELOPMENT uNIT BASED AT raaf EDINBURGH sorry guys i know a hellava lot more about jet turbines did my basic training on turbo charged aircraft engines

so believe what you want gredenko and inasnt

dont like what i write well F%^k u

Unless Nissan started putting RB26's in the series II (and did a damn good job of disguising them), you ain't got no restrictor. I don't know what the hell you've been pulling out of your engine bay to make it "go like a shower of shit", but it sure as hell wasn't a restrictor.

Wait! Maybe you turned your back on the car one day and someone dumped a RB26 in there for you. That would explain it!

Dude, don't believe me. Believe the vacum hoses that came off my car.

Name dropping hey. Well then, that backs up everything you've said. Two can play at that. I just got off the phone with HKS Japan, want to know what they said? They said you should stop waving your dick about in forums. The 25t has no boost restrictor, you probably misunderstood what ever it was tilbrooks was trying to tell you. Adding a restrictor (in the right place) will increase boost however.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...