Jump to content
SAU Community

Recommended Posts

Hi,

The story goes,

In 3 months, i have wasted 2 set of front tyres,

due to flat spot on the tyres caused by hard braking.

wasted 2 set of tyres, first set was Federal, so I replaced them with Bridgestone Potenza,

now just last week, another hard brake, due to some idiot P plater making illegal Right turn. I get another flat spot on my tyres.

my question is, why isit so easy to have a flat spot on the tyres? is there any way to avoid them? beside stop hard brake? or isit something wrong with my suspension?

Link to comment
https://www.sau.com.au/forums/topic/132010-flat-spot-on-tyres-how-to-avoid/
Share on other sites

maybe u should re-visit the way you drive and not follow/tail gate too closely??

I drive all day, everyday for work and yeah there are a lot of dickhead drivers around but have yet to really do a hard brake yet in my years of driving...

Jst keep a safe distance and you should be right...:angry:

Hi,

The story goes,

In 3 months, i have wasted 2 set of front tyres,

due to flat spot on the tyres caused by hard braking.

wasted 2 set of tyres, first set was Federal, so I replaced them with Bridgestone Potenza,

now just last week, another hard brake, due to some idiot P plater making illegal Right turn. I get another flat spot on my tyres.

my question is, why isit so easy to have a flat spot on the tyres? is there any way to avoid them? beside stop hard brake? or isit something wrong with my suspension?

Have you checked your front end and suspension.

I have seen some tyres wear out in 1 week due to faulty suspension.

You are on a time bomb, get it fixed before you snow plough into the person in front of you.

That is my guess......other than bad tyre pressures.

good luck :angry:

yeah maybe know 5 or 10km/h off ya speed. And be more aware of whats around you.

I drive safe and no tailgating as far as I know, just where i lived alot of asian lady drivers and P plater,

I scared of asian lady drivers more! lol,

they expected u to give way to them in every ways. :angry:

Have you checked your front end and suspension.

I have seen some tyres wear out in 1 week due to faulty suspension.

You are on a time bomb, get it fixed before you snow plough into the person in front of you.

That is my guess......other than bad tyre pressures.

good luck :ninja:

I have an Apexi N1 V series Coilover,

My springs at the front stiffer than the back,

front is 360, and back is 290.

could that be the causes?

couldnt think of any other things that make it so easily geting flat spot.

will change to spring at the front to match the back.

and see if that helps.

BTW, if any one 1 a set of 235/45/17 Bridgestone Potenza, S03, decent treads

for burn out or watever FREE, Pm me, it has flat spot, bumpy ride.

In liverpool area.

Cheers,

Raise your vision. And well, if it keeps on happening adjust your gap to 3 seconds, not the two it is now (assuming your a safe driver like you say you are).

Maybe also get your suspension as mentioned above and your brakes looked at as well. Wheel alinement etc.

I have an Apexi N1 V series Coilover,

My springs at the front stiffer than the back,

front is 360, and back is 290.

could that be the causes?

couldnt think of any other things that make it so easily geting flat spot.

will change to spring at the front to match the back.

and see if that helps.

BTW, if any one 1 a set of 235/45/17 Bridgestone Potenza, S03, decent treads

for burn out or watever FREE, Pm me, it has flat spot, bumpy ride.

In liverpool area.

Cheers,

You are bouncing all over the place , you might not be able to tell though.

Sounds like your shocks have had it.Maybe not matched to the springs.Get it checked .

I hope i have been some help. :ninja:

ok so try a new braking technique. just slamming the brakes on will lock up your wheels. if you can train yourself to ease the brakes on a bit slow, brush the brakes a lil bit so the nose of your car dips down, THEN push the brake in. That way you are giving the car time to shift weight to the front before you apply full pressure.

Im talking like a split second brush before you bury the pedal. Shifting the weight to the front will allow you to put more pressure on the brakes, as your tyres will be biting down into the tarmac more. If you just slam the brakes on while cruising or jump straight from the accellerator to the brake, there isnt enough weight on the front to stop the tyres from breaking traction, cos its all either centered, or at the rear. Move the vehicles weight onto the front, then bury that pedal.

Streetracing 101, dude. comes in handy sometimes.

ok so try a new braking technique. just slamming the brakes on will lock up your wheels. if you can train yourself to ease the brakes on a bit slow, brush the brakes a lil bit so the nose of your car dips down, THEN push the brake in. That way you are giving the car time to shift weight to the front before you apply full pressure.

Im talking like a split second brush before you bury the pedal. Shifting the weight to the front will allow you to put more pressure on the brakes, as your tyres will be biting down into the tarmac more. If you just slam the brakes on while cruising or jump straight from the accellerator to the brake, there isnt enough weight on the front to stop the tyres from breaking traction, cos its all either centered, or at the rear. Move the vehicles weight onto the front, then bury that pedal.

Streetracing 101, dude. comes in handy sometimes.

:):):):ninja::laugh:

This chap is doin his money in tyres and all you hoons think he drives like a monkey. :P

it just seems like bad luck to me. i think everyone missing the point he is trying to put across.

depending on how bad the flat spots are just put them on the back and do a big burn out on them and hey presto thay are round again!

i know its a shit idea but hey better than paying for more and more fun to.

mate, if you lock the brakes you are braking too hard. And if you don't quite lock the brakes you are breaking too soft :O

haha,

in all, i rather have flat spot on the tyre, cos they are cheaper than insurance claim!

rotate the tyres wont do, it is like having a rock stuck in there somewhere,

still gona get that bumpy ride no matter where u put it! :rant:

its bearable but not happy!

aniwho.

After these 2 set of tyres, emptied my pocket!

Just gota learn to avoid sudden braking and look about and around more, cant do much really.

I just invested on some camber kit, and castor kit,

what do they improve in performance exactly?

or they just help to even wear of the tyres?

Dude lets look at this again.

Why do you lock you brakes up? Too much brake pressure.

What happens when the brakes are locked? You slide

When you slide are you stopping quicker? No

If you cant stop quickly enough (as your brakes are locked, and you have no steering) you smack in to the back of something. So whats the outcome of that? You have an insureance claim.

So what you need to do, is brake differently. Dont lock up, its not the fastest way to stop, less is more! So get a wheel alinement, ask them whats wrong, tell them what its doing etc, if something is wrong fix it. Once you have done both of them if you are still locking up... Go do a defencive driving course, in your car.

And if by some crule act of god, you still havent worked it out after ALL of that go hand your licence back in. It will be the right thing to do.

I'm guessing you don't have abs. Ever thought of getting a decent r33 with abs?

If you press the brakes and locok them coz you need to stop quick, you don't have to keep it locked and do a mega slide with them locked. As soon as it locks, just release it a tiny bit.

Also, if it's got a tiny flat spot, can't you just do a burnout to even it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
    • @Stringycheese  Have you only gone to the one blue slip workshop?  There will be a heap of them where ever you live, good odds that the next place you go to will pass the car.  Unfortunately (or fortunately?) every blue slip / engineering workshop will be different and will be happy passing or failing different things - despite working from the same set of rules. It's kinda like 2 lawyers arguing over a piece of legislation, each saying their interpretation is correct. Might seem strange that this happens when it comes to getting a modified car passed, but this is very much a thing. A big part of the game is finding an engineer / workshop that is on the same page as you.
    • Bah. I daily mine. ~60km per work day, 10-12 thousand km per year. What's the point of having a dirty old Datto and leaving it in the shed. It needs to be driven and enjoyed while the govco allows us to do so. It will only be a few years before we're forbidden to even start up internal combustion engines.
    • Judging by that spring perch and the normal looking spring on it - not a coilover. Well.... it is a coilover, just a stock format coilover, rather than what everyone calls a coilover.
    • Yes it is. We get stock from Nismo directly. I'm happy to take photos/video of it as proof before I ship it with timestamps or whathaveyou.
×
×
  • Create New...