Jump to content
SAU Community

Dyno Graph Of Bnr 32 With Gt2560s In

Yawn

By Yawn,
in Engines & Forced Induction

 Share

Recommended Posts

Yawn Mentor

Yawn

Posted
Posted (edited)

post-20525-1156836511.jpg

Hey guys just got some new turbos fitted to my car and i thought id post the dyno graph up to see what u guys think. Running sort of a light tune to keep my engine alive during track days until i can afford to get a rebuild done :P . Its using a djetro pfc and still on a cat back. Plan to get a turbo back soon to try and get it to be more responsive. Any comments welcome. Cheers :D

Edited by Yawn
Yawn Mentor

Yawn

Posted
  • Author
Posted
what injectors you running?

Im running nismo 600cc ones.

3lit3 32, from what i know i should be able to easily get 500+ hp atw but i dunno about 700 heh. Yea I know im not even close to pushing the turbos but as i said, im trying to take it on the safe side for now as i do some track work. Once i get a full engine rebuild ill go all out >_< . The dyno run was on 2 wheels.

Cheers

West Grand Master

West

Posted
Posted
post-20525-1156836511.jpg

Hey guys just got some new turbos fitted to my car and i thought id post the dyno graph up to see what u guys think. Running sort of a light tune to keep my engine alive during track days until i can afford to get a rebuild done :D . Its using a djetro pfc and still on a cat back. Plan to get a turbo back soon to try and get it to be more responsive. Any comments welcome. Cheers >_<

Nice, what boost are you running? Looks around 20psi?

Yawn Mentor

Yawn

Posted
  • Author
Posted (edited)
seems quite laggy to me. 1 bar at around 4500rpm. nice power though, but they must be fairly large low mouts as the resposnse does not look that great.

yeahh from what i know, the -5 model is slightly bigger than the -7 model, which (i think) is comparable to hks 2530s. Yeah it is rather laggy but im still running a catback so im hoping the graph shifts to the left a bit once ive got front pipes/dump pipes in.

yeah West im running slightly under 20 psi. Btw how do you know its in 5th gear? :P They are bigger than both the gt-ss and the N1s

Cheers

Edited by Yawn
West Grand Master

West

Posted
Posted
yeahh from what i know, the -5 model is slightly bigger than the -7 model, which (i think) is comparable to hks 2530s. Yeah it is rather laggy but im still running a catback so im hoping the graph shifts to the left a bit once ive got front pipes/dump pipes in.

yeah West im running slightly under 20 psi. Btw how do you know its in 5th gear? :( They are bigger than both the gt-ss and the N1s

Cheers

I was only guessing :bunny: mate.

Damn, those things are bigger than Gt-ss, mad fun their. May i ask what condition is your engine in? Did you do a low boost run? Say around 14psi?

Beer Baron Grand Master

Beer Baron

Posted
Posted

west mate, it would not be in 5th gear. most DD dynos are rated to 200km/h only. It would be either 3rd or most likely 4th gear. Even if it was in 5th (which i can promise it wasn't) it shouldn't make much difference at all. if anything it may build a little earlier as the engine is under more load.

West Grand Master

West

Posted
Posted
west mate, it would not be in 5th gear. most DD dynos are rated to 200km/h only. It would be either 3rd or most likely 4th gear. Even if it was in 5th (which i can promise it wasn't) it shouldn't make much difference at all. if anything it may build a little earlier as the engine is under more load.

Thank you very much, i dont know much about Dyno thing.

West Grand Master

West

Posted
Posted
post-20525-1156836511.jpg

Hey guys just got some new turbos fitted to my car and i thought id post the dyno graph up to see what u guys think. Running sort of a light tune to keep my engine alive during track days until i can afford to get a rebuild done ;) . Its using a djetro pfc and still on a cat back. Plan to get a turbo back soon to try and get it to be more responsive. Any comments welcome. Cheers :P

Mind if i ask who or which work shop that did the tune?

Are you still running standard injectors? If so whats the percentage shown at 300kw?

D-Jetro is still very new to VIC tuning scene i think though i'd love to have it, just to get rid of the air flow meters.

rob82 Mentor

rob82

Posted
Posted
Mind if i ask who or which work shop that did the tune?

Are you still running standard injectors? If so whats the percentage shown at 300kw?

D-Jetro is still very new to VIC tuning scene i think though i'd love to have it, just to get rid of the air flow meters.

Airlfow meters is what makes the PFC so powerful. D-Jetro I assume was made for the american market as they had no idea how to tune a MAF based system. If you want to go MAFLESS get an Autronic because the time/cost taken to wiring in and tune will probably about the same to plugin and tune a D-jetro and at the end of the day the autronic is better.

DVSGOD Apprentice

DVSGOD

Posted
Posted (edited)

On a more advanced engine e.g Fully rebuilt , cams/head work and tune the lagg can be taken care of through playing with cam timing , while still not loosing any of the mid range top end punch these puppies deliver.Just take it to a tuner who knows the fine tuning insides and outs of the RB26 and you will be very rewarded.Should be able to see full boost 22 -24 psi at 4500 rpm or just under but they will start pulling hard much lower than this so are still a very streetable turbo set up.

Alot of the gtr forums I visit from around the world rate these huffers above 2530s for there response and big delivery of power in the top end.

On a fairly stock engine Id put a gtss or the 2860R -7 turbo upgrade ahead of these unless of course you are taking it further down the track,these are purfect for a hard tuned street machine.

On a fully worked engine these turbs are good for 380 - 410 awkws

Just my opinion though. :)

Edited by DVSGOD
khunjeng Veteran

khunjeng

Posted
Posted

one questions I have always wondered is assimung ur've upgraded your turbo, AFM, injectors, fuel pump PFC blah blah and your making a good 300+rwkw...at what point do u need to consider internal upgrades or is this dependant on how hard you drive it? In a street app where you may only trash it occasionally...I'm wondering how the internals hold up over a 1-2 year peroid..on say 1bar or just a little over.

Just intrested as I have a RB25 with the same mods and similar output as this dyno i.e. about 300rwk on 1bar and all the goodies...now I'm wondering how long the engine will last hehe.

GTR97 Rookie

GTR97

Posted
Posted
post-20525-1156836511.jpg

Hey guys just got some new turbos fitted to my car and i thought id post the dyno graph up to see what u guys think. Running sort of a light tune to keep my engine alive during track days until i can afford to get a rebuild done :( . Its using a djetro pfc and still on a cat back. Plan to get a turbo back soon to try and get it to be more responsive. Any comments welcome. Cheers :P

I got an r 33 GTR with a built motor and same turbos and im pushing 366 kw at all fours on 22 psi and pump fuel. My car makes 308 kw at 5600 rpm id post the dyno sheet but dont know how

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...