Jump to content
SAU Community

Recommended Posts

Hey guys,

just a quick question, i know i can purchase a hicas lock bar, but i was looking on nengun and they sell an electronic hicas lock kit. I am wondering what are the differences between the two, besides one being pysical and one being electronic.

What is the better option??

thanks guys

Todd

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/
Share on other sites

If you use the lock bar, you can remove the engine bay mounted solenoid, lines and rack, removing about 20 kg i have been told. The problem with this is you disconnect the hicas computer goes a bit heavy at slow speeds.

Using the tomei kit you will lock the hicas and have no problems with steering going heavy, so what i have done is i have bought both, ill remobe the whole system, and install the computer box so i have the best of both worlds.

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2446865
Share on other sites

I just purchased my R33 GTST last week, and i've noticed that the HICAS llight comes on everynow and then.

After reading here, it seems that if that light goes on, then there is problems. However i don't notice any real change in the rear end's stability.

I have an aftermarket steering wheel on it, so referring to the FAQ's it means it wont work properly anyway, but should i get a lock kit (as GTRGeoff provides) and simply forget about the bloody thing?

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2455070
Share on other sites

Yep have just removed mine and installed the lock bar on a R32 GTR and connected up the power steering fluid hoses as per the DIY on this forum.

And apart from the hicas light being on i had no other problems with the removal of the Hicas. And yes just over 20kgs removed from the car doing it this way and i can every change my oil filter and not dislocate every joint in my hand and arm.

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2455871
Share on other sites

I just purchased my R33 GTST last week, and i've noticed that the HICAS llight comes on everynow and then.

After reading here, it seems that if that light goes on, then there is problems. However i don't notice any real change in the rear end's stability.

I have an aftermarket steering wheel on it, so referring to the FAQ's it means it wont work properly anyway, but should i get a lock kit (as GTRGeoff provides) and simply forget about the bloody thing?

as above.

Anyone?

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2457776
Share on other sites

the only real problem is that it causes heavy steering at low speeds after a while of turning the car on.

im currently selling lock bars for $120

GTRgeoff is a good reliable source though, has been selling for a while

PM me if interested.

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2458268
Share on other sites

my car sometimes has a mind of it's own on some roads where there are those kinda ruts? like it's a full proper lane, but just had a lot of use, so there is like a wave in the road. My car will ALWAYS wander whenever there is a wavey road... would that be my HICAS? kinda tramlining of sorts...

Link to comment
https://www.sau.com.au/forums/topic/132138-hicas-lock-kit/#findComment-2458783
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Omg Brake pedal removal.. FML!!
    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
×
×
  • Create New...