Jump to content
SAU Community

Recommended Posts

26/9/15 hoosier slicks... when i can afford it i want to get some passes down on radials as the car is technically still registered :P

Ray and Mark will not let the car race at jambo... as there is a 9.99 cut off for sedans in the extreme... i've begged them every year for the last 3 years to let me race... just do some qualifying runs even... now they have a class for V8's and i still cant race....

now they have a class for V8's and i still cant race

That's ghey. You're still half a second over their cutoff, if they're really worried surely you could gear the blower down a bit or something?

I thought a about the bottle... but how much fuel do i add for a methanol dedicated system... and although i have a kit i would only want to run 8 port direct injection to ensure every cylinder gets an equal dose... no money... had to borrow money off the rents to enter..

Why wont they let me race? f**ks me! I told them i would race for no points prizemoney or trophy's, its a true example of a japanese muscle car, it has been teched and races in the national series... i asked if i could even just do exhibition runs.. nothing, y? i have no clue.. i begged them every year to let it at least run down the track...

Ill be racing my bike now... See jamboree was enver for bikes either originally, ray box and mark stanbury need there heads checked i think..

yeh its werid man id love to hear your car run down the track, i dont go to any of the other events and havent seen u at a test and tune yet, it looks nuts i havent seen itrunning since it had the skyline engine in it.

I thought a about the bottle... but how much fuel do i add for a methanol dedicated system... and although i have a kit i would only want to run 8 port direct injection to ensure every cylinder gets an equal dose... no money... had to borrow money off the rents to enter..

You don't use methanol as the nitrous enrichment fuel. Use a second tank with C16 and draw it from there. Show me a pic of the inlet manifold.

Cheers,

Adrian

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Why are people so insistent on making dirty water?!
    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...