Jump to content
SAU Community

365kw At The Wheels From Hypertunes 1.6l!

600hp

By 600hp,
in Engines & Forced Induction

 Share

Recommended Posts

600hp Proficient

600hp

Posted
Posted

Hey guys was around at C&V just then and saw the Hypertune civic just make 365KW at the front wheels just with boost, no gas!

They said it was with only 24psi.

The car is still 1595cc and revs to 11,000RPM!!!

They may up the boost more tomorrow at C&V's Dyno day. I'm going out to see it run next wednesday night.

Cheers

fr0st Experienced

fr0st

Posted
Posted

Now thats some serious vtec yo

The power curve would be interesting, civics are gutless in the low rev range in NA form, lowering the compression so you could run a decent amount of boost would kill it.

My money is on it coming on full boost at 10k :O

Faid Collaborator

Faid

Posted
Posted

why are we even discussing about a honda. I hate honda and everything about it. I have even heard some honda dudes day vtec is like boost,can you believe those idiots. i say rev all u want bitches, i know when we stand side by side on a drag strip i know that ill Be putting my power to the ground ;). stay on one place and burn your tires.

MattSR Community Regular

MattSR

Posted
Posted
Now thats some serious vtec yo

The power curve would be interesting, civics are gutless in the low rev range in NA form, lowering the compression so you could run a decent amount of boost would kill it.

My money is on it coming on full boost at 10k ;)

Yeah - this shows how good your knowledge of turbocharging is! Car still runs a high CR (9.4:1) This thing has a powerband that is over 5000rpm wide - no boost drop off between changes at all. Similar power delivery to an RB26 with a big single.

Yeah BLRCRX (james) here in Melb did similar things/numbers way back when, although i dont know the full specs, its a mighty feat without a doubt

James originally built his car to Hypertunes specs, his engine build was based on this car. This little civic is running on a 6 year old bottom end (been over 320kw at the wheels for this length of time too) and is still going strong!

600hp Proficient

600hp

Posted
  • Author
Posted

I was back at c&V today(holden Vs Ford)dyno day.

They got the little civic out again, this time with c16 and some new plugs.

They started to get the car going again but they blew a tyre, then they got some new ones on to only pop a drive shaft.

They left it for now but they will be running the car this wednesday night still they said.

I hope all goes well for them and they get the MPH that they want(140).

nemini90 Enthusiast

nemini90

Posted
Posted

Marks car from hypertune is crazy i have seen alot of work they have done over the years some of the custom work the do is crazy so if any of you guys need soom work done get them to do it they know there shit.

fr0st Experienced

fr0st

Posted
Posted
Yeah - this shows how good your knowledge of turbocharging is! Car still runs a high CR (9.4:1) This thing has a powerband that is over 5000rpm wide - no boost drop off between changes at all. Similar power delivery to an RB26 with a big single.

haha I won't deny that one :)

In all seriousness, how can you compare a 1.6L engine to a 2.6L?

You can't tell me VTEC would make that much difference (if any at all) to a conventional engine running a high lift cam when it comes to high rpm power delivery.

Or is it just cause it can rev higher?

If all other things were equal a 2.6L would flow 62.5% more exhaust gas at the same RPM right?

so having a 1.6L at 11k RPM would be the same as a 2.6L at 6750 RPM?

In that case I wanna see a 10k RPM RB20 running a TO4Z :(

32R Apprentice

32R

Posted
Posted
haha I won't deny that one :)

In all seriousness, how can you compare a 1.6L engine to a 2.6L?

You can't tell me VTEC would make that much difference (if any at all) to a conventional engine running a high lift cam when it comes to high rpm power delivery.

Or is it just cause it can rev higher?

If all other things were equal a 2.6L would flow 62.5% more exhaust gas at the same RPM right?

so having a 1.6L at 11k RPM would be the same as a 2.6L at 6750 RPM?

In that case I wanna see a 10k RPM RB20 running a TO4Z :(

Your are missing something important frost...Its called Volumetric efficiency!

Otherwise by your equations we'd all be trying to stuff 454 big blocks in our skylines :)

BTW top effort on the figures must sound insane on the dyno at 11k :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...