Jump to content
SAU Community

Recommended Posts

Can someone check this engine number for me. Thanks guys.

RB26 D20423A

For the record I got this number from the shop at which I ordered my rb26 so i am not sure it is the right number. If this is not the correct format for an engine number let me know. I dont really trust this shop but they were the only ones who claim to be able to get an r33 motor so I am checking everything i can to verify if it is a 33 thanks.

nah that wont work... it should be like HCR32 XXXXXX or ECR33 XXXXXX for e.g

also the "D20423A" part doesnt evan fit into fast... u can only put 6 characters in :ermm:

Can someone check this engine number for me. Thanks guys.

RB26

For the record I got this number from the shop at which I ordered my rb26 so i am not sure it is the right number. If this is not the correct format for an engine number let me know. I dont really trust this shop but they were the only ones who claim to be able to get an r33 motor so I am checking everything i can to verify if it is a 33 thanks.

No problem, but maybe you need to change your ID >_<

Still looking for a GTR, this is one car that I have been looking at in japan...just wanted to check the build date before I pursue it any further...in the end I might have to my id. :)

Also can anyone do a breakdown of this code.

GGJPRQFR33ZDAGJ

Thanks again for the help guys.

Edited by 96_GTR

All it came up with is the info below. Obviosly need the vin for a compltete build date and so on.

Still looking for a GTR, this is one car that I have been looking at in japan...just wanted to check the build date before I pursue it any further...in the end I might have to my id. >_<

Also can anyone do a breakdown of this code.

GGJPRQFR33ZDAGJ

Thanks again for the help guys.

post-536-1150079002.jpg

All it came up with is the info below. Obviosly need the vin for a compltete build date and so on.

post-536-1150079002.jpg

Thanks for the quick reply again kjb_r33. Much appreciated. I guess I wasn't concise enough in my last post.

Is there a way to tell what the letters mean in the Model code GGJPRQFR33ZDAGJ that FAST has given.

Thanks for the quick reply again kjb_r33. Much appreciated. I guess I wasn't concise enough in my last post.

Is there a way to tell what the letters mean in the Model code GGJPRQFR33ZDAGJ that FAST has given.

all i can find on it.

Let's work through one... GGKBRTAR33VDAA---B

The first digit defines the body type... In this case G for 2 door Coupe... (It's B for 4 door Sedan)

The next 2 digits define the engine type and size (note: not the fact that it is NA or Turbo)... in this case GK for RB25DE(T)

The next digit (4) defines the drive type... In this case B for 2WD...

The next digit (5) is R across all R33's... I'm unsure of its significance... Some translation is required here...

The next digit (6) defines the model spec... (eg: GTS, GTS25, GTS4, GTS25T/M, GTS25/S, GTR, etc...) In this case it is T for GTS25T/M + GTS25/S (note: we still don't know if it is NA or turbo yet)

The next digit (7) defines the transmission... In this case A for 4 speed auto... (It's F for 5 speed manual)

The next 3 digits (8, 9 & 10) define the Model Series... In this case R33 for (duh) R33...

Now comes the tricky part...

The next digit (11) defines the induction system... In this case it's V for Forced Induction... (It's E for EGI / NA)... Some further translation is required here...

The next digit (12) can be either D or Z... I'm unsure of its significance... Some translation is required here...

The next digit (13) is A across all R33's... I'm unsure of its significance... Some translation is required here...

Shown below are all possible entries for the first 13 digits of the R33 Model Codes...

Note that different years have different designations for the digit (mainly to cater for the GTR's and GTS4's)...

R33 Model Codes (14-18)

Erghh... So many options...

The only one I have semi worked out is the last digit (18) which will be A if you have an Active LSD, B if you have ABS, and C if you have an Active LSD and ABS... There are heaps more options for digit 18 though...

It appears digit 14 is mainly focused on the wheel and tyre sizes...

It appears digit 15 is mainly focused on the electronic options (eg, ASCD (cruise), GT spoiler, etc)

I am unsure what digit 16 is mainly focused on...

It appears digit 17 is mainly focused on the AV options (eg, CD, MD, Stacker, etc...)

Edited by kjb_r33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...