Jump to content
SAU Community

98 R33 Gtr - Wot's It Worth?

WRRR

By WRRR,
in Western Australia

 Share

Recommended Posts

32vspecII Mentor

32vspecII

Posted
Posted (edited)

i just paid 26k for my 95 vspec 90000km basically stock. v good condition

given that i wouldnt pay more than low 30s for 98 and it would have to be awesome condition and very low km

any more and you could pick up an early model and have 10k for mods/rebuild/respray/restore whatever

Edited by arkon
Kaido_RR Grand Master

Kaido_RR

Posted
Posted
do you save much money if you import one yourself?

i just depends what you are looking,

when you import you have a wider range which always help...

i found when i was looking at S3 R33 GTR, with around 50,000 to 80,000km on the clock and auction grade 4 (stock, or very little mods like exhuast or rims etc) that the cost is around 30 to 35k

but then again it depends how you are importing through etc, as they are alot of factors to look at.

ps i wont buy an r33 gtr unless it was a S3 >_<

1vea74 Enthusiast

1vea74

Posted
Posted

1997 - 1998 R33 gtrs are still around the 1.8 - 2.2million yen to buy. Just under $35k would get you something good. I just bought one for a friend and its about 2 million yen inclusive of all the auction fees...etc. Works out to about $33k++.

WRRR Rising Star

WRRR

Posted
  • Author
Posted

Hey guys

Many thanks again.

THE DEAL IS DONE - another 33 GTR heads west on a big truck.

All came up well at the workshop - compressions all 160-165, nice stock dyno outputs (just over 180 kW atw), Kakimoto 3" exhaust (need to replace the small cat though), even has the speed limiter still in place (how do I get rid of that?).

Panel man said all straight and honest.

Yehaaa!!!

Now for some 2560's, Power FC and Z32 AFM's. (Don't tell the missus though)

Cheers

32vspecII Mentor

32vspecII

Posted
Posted
Good price.

The guy I bought my 32GTR off wanted $26k, ended up paying $24k mid last year.....

thanks

i was stoked cause the car is in excellent condition cosmetically and mechanically , compression was all good , no accident damage , stock.

only issue was a hidious cheap 400r copy front bar . but theres no accounting for taste i guess

24 is a good price for a 32 . i looked at a whole heap and there wasnt many that were nice and some were getting close to 30k and were still crappy .

32vspecII Mentor

32vspecII

Posted
Posted
Hey guys

Many thanks again.

THE DEAL IS DONE - another 33 GTR heads west on a big truck.

All came up well at the workshop - compressions all 160-165, nice stock dyno outputs (just over 180 kW atw), Kakimoto 3" exhaust (need to replace the small cat though), even has the speed limiter still in place (how do I get rid of that?).

Panel man said all straight and honest.

Yehaaa!!!

Now for some 2560's, Power FC and Z32 AFM's. (Don't tell the missus though)

Cheers

when you go to your powerfc it will get rid of all cuts and limits from the stock ecu

try and get the power fc djetro . it uses map sensor instead of AFMs . Its about 300 ish more than normal power fc so you will save some cash over 2x z32 afms.

i have seen a guy get 330rwkw from just 2560s and powerfc (and exhaust ofcoarse)

Topaz Grand Master

Topaz

Posted
Posted
24 is a good price for a 32 . i looked at a whole heap and there wasnt many that were nice and some were getting close to 30k and were still crappy .

I guess, it did have a rebuild just before and a wih my current mods I might be able to get around $22k if I don't advertise here :yes:

But I want at least 400-420hp first.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...