Jump to content
SAU Community

Recommended Posts

yup.. I'm doing mine right at the moment.. rig up a proper floor, and maybe another partition to mount the amp like where you have it motoX. Did you just use a jigsaw to cut to required shape(s) ?

I can't believe how thin the real floor is - it actually relies on the spare tyre positioning to keep its shape! Thats gonna go.. My 12" sub arrived today so prolly will work that into my new floor for a bit.. Will have to relying on the tyre well for the resonation for the time being - even though it will probably not be ideal.

If you build your own floor, and wanted hidden amp effect, you could probably back-mount it to the MDF as long as you spaced it up a bit from the boot metal, and just run the wires to wherever.

If it sounds too bad, i'll eventually build my own sub box.

yeah, my boot floor is kinda warped. i bought a bag of ice and kinda left in in the boot and everything was wet the next day (refer to stains)

but the rest of ok, jsut took me ages to get the water out.

i made a box for my 2 12" to suit my vl, they have terriable shaped boots. so i tried smashing the box, neibours think im crazy.

anyhow i just need another amp. to power 2 12" subs.

put my kciker 6.5" into the rears. may i recomend you buy ones that fit your stock speaker holes or else you will be making custom things up all night.

I think im jsut goin to make a box that will be removable. and just attach it down so it dosent hit stuff.

ive seen some nice installs where theres subs either side of the boot. and the amps are raised up in the center. it looks good but $$$$$$$.

anyhow cyas

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...