Jump to content
SAU Community

Recommended Posts

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...
I'd be interested in a touch-screen LCD for $240... pending some pics and resolution/technical spec's!

ME 2!!!!! man that looks SHMICK!

like sorry for the noob question:

i dont no any thingt about the ECUTALK software.. so how does it work.... you keep a laptop in the car and are you just running the software from the laptop and av / outing to the screen....

and like so obviously it comes with some sort of unit to wire to all the sensors which plugs into the pc by usb or something...

i am VERY interested in doing this just need the basics answered....haha (now where can i put my headunit if i get one)

ME 2!!!!! man that looks SHMICK!

like sorry for the noob question:

i dont no any thingt about the ECUTALK software.. so how does it work.... you keep a laptop in the car and are you just running the software from the laptop and av / outing to the screen....

and like so obviously it comes with some sort of unit to wire to all the sensors which plugs into the pc by usb or something...

i am VERY interested in doing this just need the basics answered....haha (now where can i put my headunit if i get one)

Yeah, the laptop is hooked via the serial port to a 'consult' device which interfaces with the car. I got the consult device through a group buy via 'Newkleer'. The LCD has a VGA input which connects to the laptop.

I'll post some pics up shortly to show how I set the whole thing up.

Yeah, the laptop is hooked via the serial port to a 'consult' device which interfaces with the car. I got the consult device through a group buy via 'Newkleer'. The LCD has a VGA input which connects to the laptop.

I'll post some pics up shortly to show how I set the whole thing up.

cool can you give me a link to the thread? i have seen the ecutalk lcd sreens by newkleer so thats it and you just put that under the seat to? or you just dont have to buy the lcd screen just the unit with all the sensors which goes into the pc?

yeh info would b nice haha cheers! looks mad

I'm not sure if newkleer is still making thee units - they were different to the LCD unit he has now - best to PM him and find out. Otherwise try these guys http://www.plmsdevelopments.com/consult_if.shtml

Here are some more pics of the install:

post-4014-1164003067.jpgpost-4014-1164003102.jpg RoadRunner frontend for music/video/gps, etc

post-4014-1164003154.jpg post-4014-1164003265.jpg mounted the LCD to a mounting bracket I had from an old GPS unit

post-4014-1164003197.jpg laptop under the seat with consult interface etc.

You can build a fast and reliable computer for this Monitor to function in a car by purchasing a PC box that can be mounted in the boot or under a seat. Micro-atx motherboard, additional external sound card, with a 1gig or 2gigs of ram and a AMD 64 dual core system with a nice budget 3d card should do wonders to get video, audio and the processing speed for your data.

You can get computer boxes totally purpose built for incar use and have a PSU already made for direct connection to your batt.

Edited by SAZilla

Pauly, if you slam a dual core amd into a car your power draw will be something in the range of 400watts, you'll need something in the order of a 300-400watt DC-DC power supply to give it enough juice, and you'll probably flatten your battery if you're not careful. This is the reason why EPIA mainboards or mini-itx are so popular among carpc enthuasiasts.

cool can you give me a link to the thread? i have seen the ecutalk lcd sreens by newkleer so thats it and you just put that under the seat to? or you just dont have to buy the lcd screen just the unit with all the sensors which goes into the pc?

yeh info would b nice haha cheers! looks mad

u dont need the lcd display i make, though it does come with a consult interface (but u cant have both it and consult interface working at same time - have to flick a switch between em). plmsdevelopments.com or blazt.biz will get you a standalone interface for ~110 or so (if u go with plms, ask them price without datascan software, as u can use ecutalk for free).

i might get another batch of consult interfaces done at some stage, but nothing definite (i could probably get assembled ones made for ~70$)

ceedub - try using 12 rather than 16 gauges, will use screen better i think

Edited by NewKleer

I was thinking something in the order of 250 watts max howie, you dont need all that much power to run a computer with an average 3d card... when you start seeing GT or X(insert number here) in 3d cards thats when power draw is higher. a nice 6600 PCI-e will do the job nicely and if you put a conroe instead of a AMD 64 dual in the comp itll run even lower wattage. Conroes (Core 2 Duo) are great on power saving (based on laptop tech).

250 probably wouldn't cut it. There's a power specification chart on mp3car.com which explains why you'd probably brown out at 250 dc.

I know for sure my single core 3500 at home wouldn't boot on 250watts, imagine 250watts in a dc-dc psu.

Edited by Howie

will organise group buy once I have 10 people:

So far registered interest from

1. Howie

2. travb81

3. steveo r33

4. jaypee 23

5. nozila

6. hydie

7.

8.

9.

10.

Once I got 10 I will reconfirm price and work out next steps.

  • 2 weeks later...

I need 4 more people interested in a Lliliput screen to organise this group buy.

will organise group buy once I have 10 people:

So far registered interest from

1. Howie

2. travb81

3. steveo r33

4. jaypee 23

5. nozila

6. hydie

7.

8.

9.

10.

Once I got 10 I will reconfirm price and work out next steps.

ceedub,

do you have a dvd/cd drive hooked up to your carputer?

I'm wondering how to mount a dvd drive and this LCD touch screen. Seen some units on mp3car.com which combine the two into a single DIN or a double DIN unit, they seem like a good idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...