Jump to content
SAU Community

Question For Time Attack (track Day) People

ZENNON

By ZENNON,
in Queensland

 Share

HICAS vs No HICAS (Track use)  

34 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

ZENNON Grand Master

ZENNON

Posted
Posted (edited)

Hey guys,

Ive just bought an 1992 R32 GTSt and am planning to take it to track for a bit of fun. It has HICAS installed at the moment which as far as I can tell works fine. (HICAS light comes on sometimes due to a bad contact somewhere - which goes away when you spray contacts with contact cleaner).

Anyways real question is what do you guys think? Would I be better off removing the HICAS? I personally think its crap but have had a few friends (who have had 4WS cars but dont know anything about skylines) tell me that maybe it just takes some getting use to....

I think its fine for the road but dont like it when turning under speed - so whats the verdict?

Comments welcome

Edit: One friend even suggested trying it with HICAS atleast once which is also an option i suppose...

Edited by ZENNON
predator Grand Master

predator

Posted
Posted

You can keep it for a little while. I have been out with HICAS still on, didn't kill me..

The general consensus is remove it when you can for more predictable handling, but it's not mandatory if you are just out there to have some fun.

ZENNON Grand Master

ZENNON

Posted
  • Author
Posted
it's pretty easy. unless u did wat i did and didnt crack the 2 nuts before removing the 2 main bolts that hold it inplace :wave:

ah yeah ive heard people complain about that... you wouldn't be able to show me in a pic which nuts to crack before i undo which bolts...

would be very helpful

Baysidebluebnr34 Rising Star

Baysidebluebnr34

Posted
Posted

I rekon leave it on, go to track day see how it goes, then if it feels funny take it off for the next track day. This way you will be able to feel exectly what the change does.

Sam

Revhead Grand Master

Revhead

Posted
Posted

Yeah what Gordo said. HICAS makes it a bit difficult to hold a precise line mid-corner (because the computer decides it wants to change the angle of the back wheels :wave: ) and can make it feel a bit nervous. That said, to the day I sold it my Skyline still had the HICAS connected and working, once I got used to it I just let the rear end wander a little, and made small steering adjustments to keep my line accurate. It does feel a bit wierd but you can drive around it.

Also consider though, the effect a lock bar may have on your insurance/wallet. This is second hand info so I'd be checking it yourself if you're concerned, but I'm told lock bars are illegal because they are a modification to the steering systems. You could be defected for it, and if you crash you may not be covered. I never followed this up myself because I had no need to, but it might be worth checking :D

ZENNON Grand Master

ZENNON

Posted
  • Author
Posted

thanks for the advice guys

Yeah what Gordo said. HICAS makes it a bit difficult to hold a precise line mid-corner (because the computer decides it wants to change the angle of the back wheels :no: ) and can make it feel a bit nervous.

Yeah... I think Ill see how I go but Im inclined to remove it...

Also consider though, the effect a lock bar may have on your insurance/wallet. This is second hand info so I'd be checking it yourself if you're concerned, but I'm told lock bars are illegal because they are a modification to the steering systems. You could be defected for it, and if you crash you may not be covered. I never followed this up myself because I had no need to, but it might be worth checking :kiss:

Nah itll be fine! :laugh:

r_speedfreak_r Proficient

r_speedfreak_r

Posted
Posted

where do people get the lock bars from? I got an r33 and was going to take mine off but didnt really know where to get the lock bars made up. I've taken corners at high speeds before and i think the skyrice handles fine even with the hicas

R33S2 Grand Master

R33S2

Posted
Posted

I really had no problems with the handling under hicas, I just didnt like a computer cutting in on my driving, I used the Tomei kit, which gives you the option of going back quite easily for the 33, with the 32s the Hicas is hydraulic and a weight saving can be had by its removal.

Col-GTSX Grand Master

Col-GTSX

Posted
Posted

If you want full control then remove hicas...

If you want some help then leave it in...

I used to race go karts and hicas just messed with my driving style so i removed it quick smart... Im just used to not having it so it was an easy decision for me... Also it does scuff your tyres on the inside edge on the rear faster then with out hicas...

Col-GTSX Grand Master

Col-GTSX

Posted
Posted

hicas is 4 wheel steer...

Well not really 4 wheel steer just more like the rear wheels moving slightlly a couple of degres to help through corners...

There are 2 types of hicas, there is the one where the whole rear suspension moves like found in the HR31's and then there are ones with an actually second steering rack just for the rear wheels like in the 32,33,34...

Personally i dont like hicas...

Squishy Experienced

Squishy

Posted
Posted

My bf purchased a tomei lock out kit for his 33 off nengun.. as his car was actually CRAB WALKING as a result of of the hicas LOCKING ON in one direction..

It's all been installed now.. and car drives straight! :P

In 32's it is much easier to fix as the hicas is mehanical where as the 33's have an electrical one.

I drove my 32 with the hicas light on and it was gay to drift.. as the back wheels had a mind of their own!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      100% the factory sender is tapered, that is how it seals (well, that and teflon paste or tape)
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Thanks folks - I've saved a few links and I'll have to think of potential cable/adapters/buying fittings. First step will be seeing if I can turn the curren abortion of a port into something usable, then get all BSPT'y on it. I did attempt to look at the OEM sender male end to see if it IS tapered because as mentioned you should be able to tell by looking at it... well, I don't know if I can. If I had to guess it looks like *maybe* 0.25 of a mm skinnier at the bottom of the thread compared to where the thread starts. So if it is tapered it's pretty slight - Or all the examples of BSPT vs BSPP are exaggerated for effect in their taper size.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
×
×
  • Create New...