Jump to content
SAU Community

Recommended Posts

Thanks guys - how old do I feel ! 39 yesterday. Ha ha.

Sat on my arse all day infront of the TV and computer - Having a busted leg is no fun !

Tosh - Once the leg is better, I plan od getting out to see you guys some more - Now that I have a half decent car again !

Project Cosmo is coming along well - with a few suprises coming up :(:):P

copulater

B-Man

I farking can't help myself......

Told myself I was going to keep the Cosmo pretty much stock - and modify the shit out of the TX3 - Now I am doing both - and spending heaps more $$ on the Cosmo.....

Oh well, guess it is in my blood.

I have NFI how the Cosmo will go with the T04Z - the only comparison I have are some 20Bs with either the T04S or GT3542 - And in my opinion the HKS T4O4Z is better for spool and top end than both of these.

Should be good though - 20B will bring on the boost pretty quick and the turbo is rated to 700 or 800PS depeding on where you get your specs from.

Now for a wastegate - oh, whoops - I just found one...........

At least the Cosmo will stop well - it will never be a track car - but I might take it out on the track after the............. wait for it...............

Manual Conversion........ - OMFG - Did I just say that.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...