Jump to content
SAU Community

Big Sub Setup In R32

nemz

By nemz,
in Car Audio & Electrical

 Share

Recommended Posts

nemz Experienced

nemz

Posted
Posted

i have 2 x 15" 1000 watt rms subs with stupidly big magnets connected to them which i have to install, atm i only have one in in a fairly large box, which i needed to remove my spare tyre to get in, i havnt looked far into the boxes yet, just wandering if anyone knew if i could get a dual 15" box which would fit strait in or even 2x boxes, and keep in mind they cant be too shallow thx in advance

Link to comment
https://www.sau.com.au/forums/topic/137648-big-sub-setup-in-r32/
Share on other sites
nemz Experienced

nemz

Posted
  • Author
Posted (edited)

so your saying i should make 2x 15" holes in my bootlid and mount them in? genious!!

now serious help please, i know its a bit ridiculous but i had 2x 12" alum 1000 watt rms subs and i duno... just didnt have the deep low rumble i like, i know it will fit all i wanted to know was if any body knew any boxes which would fit strait in, to try make life easier for me before i go to the effort to make one myself or get one custom made depending on how lazy im feeling

Edited by nemz
Chris Rogers Grand Master

Chris Rogers

Posted
Posted
so your saying i should make 2x 15" holes in my bootlid and mount them in? genious!!

now serious help please, i know its a bit ridiculous but i had 2x 12" alum 1000 watt rms subs and i duno... just didnt have the deep low rumble i like, i know it will fit all i wanted to know was if any body knew any boxes which would fit strait in, to try make life easier for me before i go to the effort to make one myself or get one custom made depending on how lazy im feeling

short of removeing the rear seat that is the only realy way I can see 2 15" subs in there properly.

nemz Experienced

nemz

Posted
  • Author
Posted

hahah yeh i have my new body kit on its way here now finally completed and my car is gone till jan 10th :) im spewing man, i cant beleive my car got impounded for a measly little chirpy into second gear.. and yeah all that gear did go in

list of it goes

1x 1 farad capacitor(soon to have an extra 4 farad for sub amp)

1x earthquake 900.5 amp for speakers

1x lanzar 4000 watt mxa 282 amp 2 channel sub amp(if you dont know who lanzar is, its made in the usa by boston acoustics)

2x audiopipe 1000 watt rms 15" dual 2.5 inch voice coil subs

the lanzar amp takes up the whole length of the back of the seat, and earthquake which is pictured as the blue amp in that pic takes up the rhs and the box is a shall box which takes up the whole height of my boot and almost width and lenght so yeh when you open all you can see is system and no floor, it was a bit messy but will re wire and stuff to make it look better when i get the car back

speakers

- earthquake 400 watt 5x7 in doors with tweeters

- earthquake 600 watt 6.5" splits in rear

deck

- pioneer deh-p5750mp

3x 5v pre out with full sub control + multiple amp control

mp3,wma etc

remote

wires

dual 4 guage wires with gold plated terminal

100 amp fuse

3x cadence rca's (i wouldnt recomend these im changing very soon)

12 guage oxygen sealed speaker wires all around

dB rating? not sure yet but will try find out some time soon

Trust33 Grand Master

Trust33

Posted
Posted

what a list.

Ive never tried to fit a 15'' let alone 2 of them.2guup has 2 12's that are a tite fit.i dont rate ur chances of fitting them.

All i could suggest is that you tear out the whole stock boot trim and start from there.make the spare tyre well one hole 4 the sub.but remember u have a huge magnet so make sure the metal in the boot dont interfere.hey! the second sub you could mount like a step.free air would be ur best option n use the boot as the box 4 da home made!!

Haysey Grand Master

Haysey

Posted
Posted

thats a hektik install in that pic, team lets put an amp through a sub going too fast around a corner....

oh and if your car got impounded, take it to court, get some good legal representation and you might be suprised..

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Torana Lx Gtr Hatch, Lots Of Pictures

      By MBS206 · Posted

      I'll just leave this with, holy shit, those cars at work are awesome, and this will look wicked!
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Could you modify this duct so instead it pushes the extra air through the radiator too and not down and out? For temps, I know it's not the greatest idea, but as a bit of a last resort, you could use a very intermittent misting spray onto the front of the coolers/rad. You don't want to be soaking them such that water is dripping off, but a small most on/off so that the water evaporates. That point of it constantly evaporating, rather than being soaked in water, will pull a LOT of heat out of the cooler. I'm literally thinking just the little mist sprayers for a garden from Bunnings. Being in a low humidity climate it will help even more! The other trick if you want to be ghetto is some shade cloth hung in the opening, and keep it wet. Pretty much now it's acting like an evap cooler on a house, but cooling the air you need to use to cool the radiator...   On a topic to think about too though, when air enters through the bumper, is it all nicely ducted from the edges of that opening back at a nice angle, or is it like most cars, and the edge of the opening just stops, and suddenly it's wayyy wider behind that? If it does the later, get it shrouded out at nice angles. When that opening changes too rapidly, it can actually cause a high pressure zone between the front bar and radiator, and limit air flow into that area, which means less air for cooling, as it effectively stalls the air, AND adds to drag...
    • soviet_merlin
      Wheel refurb?

      By soviet_merlin · Posted

      Do you have any before and after photos? That's $200 just for the hydro blasting?
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      Yea pedal box and no abs
    • zoomzoom
      WGNC34 Rear springs

      By zoomzoom · Posted

      It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
×
×
  • Create New...