Jump to content
SAU Community

Recommended Posts

Every 5k for me, the car is a turbo, its old, every 5k oil change that costs $70 can maintain the engine and save me a $1500+ rebuild....

Oil is oil, your engine loves the fresh stuff, imagine it like this...

Every 5k - a shower a day

every10k - a shower every 2 days.....

i dont wana smell :laugh:

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

The manual says 5000k's for a turbo's oil change and 10000k's for oil filters.

Totally insane to run new oil through a 5000k old filter that costs all of $10.00??????

No matter what, I never go near 5000k's, always less, and I do filters at 2500k's max with a top up to bring the dipstick level correct.

Anyone going to 10k's is just begging for lash adjuster problems.

The manual says 5000k's for a turbo's oil change and 10000k's for oil filters.

Totally insane to run new oil through a 5000k old filter that costs all of $10.00??????

No matter what, I never go near 5000k's, always less, and I do filters at 2500k's max with a top up to bring the dipstick level correct.

Anyone going to 10k's is just begging for lash adjuster problems.

Yikes, Im waiting for a new slogan: 5000 Kms is too much!!! Change at 1000 Km!!!

Why change the filter at 2,000km. If it really is full of junk at that stage, your engine has serious issues. Good quality filters are good for 10,000km.

Because I'm an old fart, been there done that etc.

I also know that with a blocked filter and even on cold start up, your system will run on by-pass quite happily re-circulating all the crap.

I advise anyone with the 10K filter mindset to cut up the occassional filter.

The cheapest insurance you'll ever get is a $10 oil filter.

Well I'm not here to tell people what to do but I reckon 2,000km changes is overkill! Yes a filter will go into bypass if its full of junk but as I mentioned, unless the engine has issues, a filter should not be full by 2,000km. Even then if the filter is plugged, by cutting it up you can't see anything anyway. Also when a filter goes into bypass, the debris is embedded into the media (unless you got chunks of metal!) so it shouldn't be going anywhere. Sorta like dipping a dirty shirt in a bucket of water.. the dirt just doesnt 'wash off' sorta thing.

yeah Busky2k is correct. 2k is actually worse than 10k...it wont start working for a while and not filter stuff properly as its being bypassed.

there is a lot of technical threads about how the filter works and why longer is better than shorter.

As for the whole 5k OCI...if u use a 300V or Redline ester based oil...again ur not letting the adatives do their thing...and hence just wasting valuable money. if ur gonna do it 5k under normal driving conditions just use a cheep oil.

Myth Busters needs a call on these..useing 10k OCIs on my car with redline, you should see how clean it is...no crud at all.

read this great info from BITG.

http://www.shoclub.com/lubrication-oil/lub...on-oilpart4.htm

Cheers for the feedback guys, seems to me a majority of you guys change it at 5000km due to "better safe then sorry" saying. I guess Ill probably change it at 10000km and then 5000 and see how it goes since theres no hardcore evidance that you need to change it every 5000.

every ~5,000 or 6 months.. depending how i've been driving.. I only do 10k km's a year.. so it's easy!!..

there is more hardcore evidence that 10k + OCIs with good oil and a good filter is better than 5k...if ur concerned do a UOA on your oil and see how its going and dont guess....

  • 3 weeks later...

Is the Motul & Redline stuff really that good that you can get double the kays of other brands??? Seems a little optimistic to me. I may have to try it out just to see.

Think I'll be going a K&N filter if I do it though, not overly happy with the standard nissan filter. Started having major lifter rattle 1 day for several minutes after start up, was never a problem with the ryco's like that. Car's only done 4000 kays on the filter & oil (Elf Excellium 5W-50)

fully synthetic oils these days last much longer than mineral or semi synth oils. I don't recommend it, but you can probably leave it longer than 10,000 and still be protecting your engine properly.

I change my oil every 4,000kms or 6 months in a car that sees mostly track work these days. I also use genuine nissan oil filters, they are like $12-13

u shouldnt expect that when u first imported it, it was fresh oil either. when i got mine i changed the oil first thing, before i started using it.

but yea i have to agree with most, depends how u drive it, or how much u care about ur engines wear and tear.

i change mine every 2-4k and i drive it easy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...