Jump to content
SAU Community

Recommended Posts

Hi everyone just need your help have searched the forum n tried, what could be wrong with my r33 gtst series1. I was driving just cruising around on a hot victorian day, when slowed down to stop on a traffic light my car suddenly stop running, all the power lights still running stereo on and nothing that would suspect its the battery. Jump start it no go. Push start it again n again no go. den went n bought a new battery with 470cca on it, still no go. when I turn the ingnition on I can hear the fuel pump priming, then turn key all the way to start, all i hear is just a click, dash lights dim then nothing not even a crank just a click.Ive checked the crank angle sensor, afm (cleaned), push all the plugs making sure they are connected properly, tap the starter motor with a hammer,checked all the fuse in the car, boot, and front engine but all is fine and still no go. what could be wrong. Here are my mods fron mount, piggy back fuel controler(e-manage), boost control 10psi, changed my ignition to a waste spark. Please help!!! THANKS

Link to comment
https://www.sau.com.au/forums/topic/138661-help-car-wont-start-whats-wrong/
Share on other sites

But there's still power. Headlights n interior lamps work all electronic works, put in a new battery with 470ccamps on it but still doesnt start. tried push starting it no go, jump start it still nothing all I hear is a click thats it no crank or anything its not turning over....

But there's still power. Headlights n interior lamps work all electronic works, put in a new battery with 470ccamps on it but still doesnt start. tried push starting it no go, jump start it still nothing all I hear is a click thats it no crank or anything its not turning over....

If thats the case it has to be the starter motor its prob seezed up on you or something, when you try to push start it does it try to crank over if it does your starter motor shouldnt be seezed it would be an electrical prob.

good luck with that.

Yeah I was thinking maybe the igniter does'nt work cuz of my waste spark set up. But why does'nt it crank. I can hear a click but that's it. Does anyone know how to check the ecu error code. Sorry guys but realy desperate here!! Thanks for the replies

Does anyone know how to check the ecu error code. Sorry guys but realy desperate here!! Thanks for the replies

You have to get the car to a workshop with the computer to plug into the car to read the error code as far as I am aware unless there is an aftermarket tool to do this?

Probably easier and quicker cause of time of day that you call the NRMA or local motoring group in your state and get them to come out and check it out.

Drew.

if it clicks and doesn't turn over the starter isn't working, either because it is dead, its not getting enough power (battery or alternator), or it's relay is stuffed.

Pull the starter off, clutch start it down to an auto electrician and get them to check the starter and its solenoid.

yeah id guess starter motor. only problem i had with that was i had to have mine rebuilt. couldnt find a second hand one. still only took a day for my mechanic to take it out, send it away to be rebuilt and put it back in. think it was $260 all up.

this sounds like a starter motor. because the click you hear when you turn the switch is the start relay cliking. but then again why would the car die in mid traffic?? i mean the starter doesnt run while youre drinving. have you ignition cheked, look into your rebuilded ignition setup, maybe somthing wanst hooked up properly. When i tell people to stick to their stock type ignition systen ie the 6 coil setup, they ont tend to listen.

gday

you could have blown a fuse?

thats what happened to me i was at a stop sign and then my car just died, i tried to clutch start it but it had no effect, later on my mechanic said i had blown a fuse.

so why dont you check that out.

hope this helps, goodluck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And if you want more power, more reliably, and cheaper, go get the Aussie RB... The 4L Barra and put that in instead.
    • No cats will keep discolouring the rear bar. Sends white paint a weird yellow stain. Cut and polish normally gets it out, but you'll be doing that every fortnight I found.
    • Both heads will be equally reliable or unreliable depending on what you do to them.  Stock the RB26 head will flow more. You have access to the stock intake ITB manifold on the RB26 cheaply which flows really well(1000hp+).   Arguably more aftermarket support for RB26, though in Aus we love our RB30 SOHC heads too.    The only downsides to the RB26 head is if you have a VL commodore and want to keep the SOHC look.  Where you may have an issue is drilling out the rb30 block for the bigger head studs but if you are building a big power motor you'd probably put bigger studs on the SOHC head too.  This is just about finding a good machine shop, sometimes easier said than done.  RB30 head worked can make big power just like a Rb26 head, so really it actually more comes down to what your preference is for your car.  People now even making billet versions of both.
    • 2630s work perfectly well. There is something to be said for just using the 30 head, as it saves all the pain of the conversion, still makes tons of power, still sounds cool, etc etc. 2630 will obviously make more power again, but the differences are not stupidly big. It really depends on whether you're racing for sheep stations or not. If it's dead serious, then it's a 26 head. If it's just for fun, it could go either way. But the 26 head and the effort to get it set up, etc etc, is part of the fun.
    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
×
×
  • Create New...